Am 04.04.2014 14:37, schrieb Harshal Vora: > Hi Oleksij, > > When the chipset goes into sleep mode and cannot come back due to errors > like "Chip reset failed", > we do not get any traffic inflow or outflow on that interface. > > Is it safe to assume that when no traffic is visible on that interface, > we can restart that interface. > Is there any way to check that the device is in that particular failed > state?
Only getting error log directly form FW will tell what exactly happens. You will need solder TX and GND on the chip. See https://wikidevi.com/wiki/AR9271 > ip link, ip addr, ifconfig all show that the link is UP, but tcpdump > does not show any traffic. > > Regards, > > On 03/31/2014 02:40 PM, Harshal Vora wrote: >> Hi Oleksij, >> >> I compared the initial few commits from wireless-testing repo with >> 3.13.y branch of raspberry linux git repo. Seems like all of those >> have been merged. >> >> I also specifically checked commits only for >> /drivers/net/wireless/ath/ath9k folder and seems like they are also >> present in the raspberry linux repo. >> >> So I assume all the changes should be there. >> >> If issues persist, then I will test with the wireless-testing repo as >> well. >> >> Thanks, >> Regards, >> >> On 03/31/2014 01:52 PM, Oleksij Rempel wrote: >>> Am 31.03.2014 10:06, schrieb Harshal Vora: >>>> Hi Oleksij, >>>> >>>> We will test with kernel version 3.13.7 and also the latest firmware. >>> I assume we misunderstand each other. FW will work with older kernel >>> versions and some bugs are fixed in 3.13. But only wireless-testing.git >>> can detect some FW oopses, and has changes which may affect AdHock >>> mode. >>> I recommend you to use wireless-testing.git or at least try to >>> cherry-peak this changes. >>> >> > -- Regards, Oleksij
signature.asc
Description: OpenPGP digital signature
_______________________________________________ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel
