Hi Lorenzo, Since friday I enable dynack on an AP who serve 35 sta (on 2 MIMO 2x2 5ghz wireless cards 12&23) in outdoor (up to 8 kms) results are good. latency is good for all sta I’ll take your new patches and make one for openwrt and, recompile Thanks; Philippe
Le 20 juil. 2014 à 14:31, Lorenzo Bianconi <lorenzo.biancon...@gmail.com> a écrit : > This patchset adds support for estimation of the ack timeout (dynack) in ath9k > driver. Ath9k dynack computes the ack timeout based on ack frame RX timestamp, > TX frame timestamp and frame duration. > > Ath9k dynack has been tested in indoor environment using AR9223/AR9280 chipset > (running 3.16.0-rc5 kernel) and on 9Km PtoP link using AR9280 chipset > (running OpenWRT trunk, compat-wireless-2014-05-22) > > Changes since RFCv2: > - disable dynack by default > - add ath9k_enable_dynack() method to enable ack timeout estimation algorithm > - remove dynack entry from ath9k debugfs > > Changes since RFCv1: > - use ISC license instead of GPLv2 one > - use an inline method instead of a macro for EWMA calculation > - use powers of two weights in EWMA calculation > - fix typos > - add ath_dynack_node_init/ath_dynack_node_deinit methods > - use different logic to enable/disable dynack processing > > Lorenzo Bianconi (10): > ath9k: export methods related to ack timeout estimation > ath9k: add duration field to ath_tx_status > ath9k: add dynamic ack timeout estimation > ath9k: add config for (en|dis)abling ack timeout estimation > ath9k: do not overwrite ack timeout estimation > ath9k: add sampling methods for (tx|rx) timestamp > ath9k: enable control frame reception > ath9k: add debugfs support for dynack > ath9k: add ath9k_enable_dynack() method > ath9k: initialize ath_node linked list > > drivers/net/wireless/ath/ath.h | 2 + > drivers/net/wireless/ath/ath9k/Kconfig | 7 + > drivers/net/wireless/ath/ath9k/Makefile | 3 + > drivers/net/wireless/ath/ath9k/ar9002_mac.c | 7 + > drivers/net/wireless/ath/ath9k/ar9003_mac.c | 9 + > drivers/net/wireless/ath/ath9k/ath9k.h | 3 + > drivers/net/wireless/ath/ath9k/debug.c | 28 +++ > drivers/net/wireless/ath/ath9k/dynack.c | 345 ++++++++++++++++++++++++++++ > drivers/net/wireless/ath/ath9k/dynack.h | 96 ++++++++ > drivers/net/wireless/ath/ath9k/hw.c | 16 +- > drivers/net/wireless/ath/ath9k/hw.h | 7 + > drivers/net/wireless/ath/ath9k/mac.h | 1 + > drivers/net/wireless/ath/ath9k/main.c | 38 +++ > drivers/net/wireless/ath/ath9k/recv.c | 7 +- > drivers/net/wireless/ath/ath9k/xmit.c | 5 + > 15 files changed, 570 insertions(+), 4 deletions(-) > create mode 100644 drivers/net/wireless/ath/ath9k/dynack.c > create mode 100644 drivers/net/wireless/ath/ath9k/dynack.h > > -- > 1.9.1 > _______________________________________________ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel
