This link has the patches and processing scripts. http://wiki.spench.net/wiki/RADAR
Thanks, Abhinav On Sat, Aug 2, 2014 at 4:05 PM, Pannirselvam Kanagaratnam <pan...@xsmail.com > wrote: > Thanks Adrian. 2 & 3 are done. Will look into regdb. > > Regards, > > Pannir > > On 03/08/2014 6:18 AM, Adrian Chadd wrote: > > hi! > > > > I think you'll have to hack up a custom regulatory domain database > > that includes the frequencies your device is licenced to work on. > > > > The things that need to happen: > > > > * regdb support, or the driver/802.11 layer won't let you do anything; > > * make sure your AR9590 has the "I'm allowed to do 4.9GHz!" bit in the > > OTP EEPROM set, or the NIC may not let you; > > * then make sure the AR9590 has calibration data for the 4.9GHz > > channel(s), or things won't work very well. > > > > > > -a > > > > > > On 1 August 2014 01:57, Pannirselvam Kanagaratnam <pan...@xsmail.com> > wrote: > >> Hello, > >> > >> I would like to know how to enable 4.9 GHz on ath9k. The module I am > >> using is based on AR9590. > >> > >> Regards, > >> > >> Pannir > >> _______________________________________________ > >> ath9k-devel mailing list > >> ath9k-devel@lists.ath9k.org > >> https://lists.ath9k.org/mailman/listinfo/ath9k-devel > > _______________________________________________ > ath9k-devel mailing list > ath9k-devel@lists.ath9k.org > https://lists.ath9k.org/mailman/listinfo/ath9k-devel >
_______________________________________________ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel
