Hi Kalle, Sorry, I forgot to mention that this is intended for -next.
Sujith Sujith Manoharan wrote: > From: Sujith Manoharan <c_man...@qca.qualcomm.com> > > This series adds initial support for AIC. > > Active Interference Cancellation is a method > implemented in the HW to counter WLAN RX > sensitivity degradation when BT is transmitting > at the same time. This feature is supported by > cards like WB222 based on AR9462. > > Sujith Manoharan (7): > ath9k: Add initial structures for AIC > ath9k: Register private AIC ops > ath9k: Add register definitions for AIC > ath9k: Handle MCI_STATE_AIC_CAL_SINGLE > ath9k: Finish AIC calibration > ath9k: Process the AIC calibration results > ath9k: Disable AIC by default > > drivers/net/wireless/ath/ath9k/Makefile | 3 +- > drivers/net/wireless/ath/ath9k/ar9003_aic.c | 534 > ++++++++++++++++++++++++++++ > drivers/net/wireless/ath/ath9k/ar9003_aic.h | 58 +++ > drivers/net/wireless/ath/ath9k/ar9003_hw.c | 1 + > drivers/net/wireless/ath/ath9k/ar9003_mci.c | 5 + > drivers/net/wireless/ath/ath9k/ar9003_phy.h | 25 -- > drivers/net/wireless/ath/ath9k/btcoex.h | 12 + > drivers/net/wireless/ath/ath9k/hw-ops.h | 8 + > drivers/net/wireless/ath/ath9k/hw.h | 6 + > drivers/net/wireless/ath/ath9k/reg_aic.h | 168 +++++++++ > 10 files changed, 794 insertions(+), 26 deletions(-) > create mode 100644 drivers/net/wireless/ath/ath9k/ar9003_aic.c > create mode 100644 drivers/net/wireless/ath/ath9k/ar9003_aic.h > create mode 100644 drivers/net/wireless/ath/ath9k/reg_aic.h > > -- > 2.3.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-wireless" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html _______________________________________________ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel
