[ath9k-devel] [PATCH v2 08/11] ath9k: Handle MCI_STATE_AIC_CAL_RESET

[Sujith Manoharan]

From: Sujith Manoharan <c_man...@qca.qualcomm.com>

Add a routine to handle the MCI_STATE_AIC_CAL_RESET
message.

Signed-off-by: Sujith Manoharan <c_man...@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_aic.c | 8 ++++++++
 drivers/net/wireless/ath/ath9k/ar9003_aic.h | 1 +
 drivers/net/wireless/ath/ath9k/ar9003_mci.c | 4 ++++
 3 files changed, 13 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_aic.c 
b/drivers/net/wireless/ath/ath9k/ar9003_aic.c
index 7bdbc7a..4e8cf08 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_aic.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_aic.c
@@ -512,6 +512,14 @@ exit:
 
 }
 
+u8 ar9003_aic_cal_reset(struct ath_hw *ah)
+{
+       struct ath9k_hw_aic *aic = &ah->btcoex_hw.aic;
+
+       aic->aic_cal_state = AIC_CAL_STATE_IDLE;
+       return aic->aic_cal_state;
+}
+
 u8 ar9003_aic_calibration_single(struct ath_hw *ah)
 {
        struct ath9k_hw_mci *mci_hw = &ah->btcoex_hw.mci;
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_aic.h 
b/drivers/net/wireless/ath/ath9k/ar9003_aic.h
index e31c44e..f7c9546 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_aic.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_aic.h
@@ -53,6 +53,7 @@ struct ath_aic_out_info {
        struct ath_aic_sram_info sram;
 };
 
+u8 ar9003_aic_cal_reset(struct ath_hw *ah);
 u8 ar9003_aic_calibration_single(struct ath_hw *ah);
 
 #endif /* AR9003_AIC_H */
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c 
b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
index 6fa98e5..d6ed628 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -1363,6 +1363,10 @@ u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type)
                value = (!mci->unhalt_bt_gpm && mci->need_flush_btinfo) ? 1 : 0;
                mci->need_flush_btinfo = false;
                break;
+       case MCI_STATE_AIC_CAL_RESET:
+               if (ath9k_hw_is_aic_enabled(ah))
+                       value = ar9003_aic_cal_reset(ah);
+               break;
        case MCI_STATE_AIC_CAL_SINGLE:
                if (ath9k_hw_is_aic_enabled(ah))
                        value = ar9003_aic_calibration_single(ah);
-- 
2.3.1

_______________________________________________
ath9k-devel mailing list
ath9k-devel@lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel