Hello all, We’ve recently tried to test packet injection performace in ath9k monitor mode. We set 2 laptops in monitor mode , PC 1 send a 500 Byte packets out, and PC 2 return a 500 Bytes packet back at once when it receives the packet of PC 1. Then we measured the RTT time and found it's about 1000us !!!
Test environment: NIC: AR9287 driver: ath9k system: ubuntu 14.04 with kernel 3.14.57 send rate : at a fixed rate 54Mb We tried to send packets as "low" as possible in driver stack, and we're sure that we disabled the CCA and backoff using flags below: AR_DIAG_FORCE_CH_IDLE_HIGH AR_DIAG_IGNORE_VIRT_CS AR_D_GBL_IFS_MISC_IGNORE_BACKOFF besides we change the aifs to 1 and cwmin cwmax to 0 in ath_txq_setup to ensure there's no backoff. we even put our laptaps to a underground garage where channel is almost clean.But the test results is still about 1000us.... We've been stucked for serveral months, Any suggestion? Any feedback welcome... Thnkz in advance!!! Cesar
_______________________________________________ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel