Dear experts,Has anyone has the throughput numbers for AR9287? On a 802.11g
(20MHz), I could measure < 20Mbps with iPerf.And are the below measurements
done in an anechoic chamber free from other WiFi traffic and only 2 clients
(source and sink for iPef) connected to a WiFi AP?Regards
Sandeep.
On Friday, 1 July 2016 8:02 AM, Le Tran Dat <tranda...@gmail.com> wrote:
I did TCP test within RF boxes.
The results seems right to me because my AR9342 is 2 streams and I can get
65-70.With your 9580, If I am not wrong, is 3 streams, you can get up to 95.
However, I am going to test 9558 to see how much it can go. I expected 2
streams 20Mhz to get around 90Mbps.
Thanks,Dat
My AR9342 is 2 streams
On Wed, 29 Jun 2016 at 19:33 Matthias May <matthias....@neratec.com> wrote:
On 29/06/16 13:01, Le Tran Dat wrote:
> Hi,
>
> I am testing AR9342 Throughput with 20Mhz channel bandwidth, using
> OpenWRT/LEDE firmware.
> However, the throughput result is quite low. About 65Mbps to 70Mbps
> while the bitrate is 144Mbps.
> While testing I monitor the CPU usage and it's still free for about 30%.
> Is it the best it can do? How to improve it?
>
> Thanks,
> Dat
> --
> Thanks,
> Dat
>
> Sending from my iPhone
>
>
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel@lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>
How are you testing this?
On an 9580 using iperf and sending in the VI queue i get around:
TCP: ~94Mbit/s
UDP: ~122Mbit/s
BR
Matthias
_______________________________________________
ath9k-devel mailing list
ath9k-devel@lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel
--
Thanks,
Dat
Sending from my iPhone
_______________________________________________
ath9k-devel mailing list
ath9k-devel@lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel
_______________________________________________
ath9k-devel mailing list
ath9k-devel@lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel
