Hi folks Before I ask on the ivtv list, I thought I'd check here in case it's a packaging issue.
Using smart, I just upgraded my FC5 box from 2.6.17 and ivtv 0.7.1 to 2.6.18-1.2257.fc5 with ivtv-kmdl-2.6.18-1.2257.fc5-0.8.2-123.fc5.at On boot, ivtv bails out with these errors: Feb 9 16:59:56 mythbox kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) [snip.....] Feb 9 16:59:56 mythbox kernel: ivtv0 warning: 1000 ms time out waiting for firmware Feb 9 16:59:56 mythbox kernel: ivtv0 warning: Failed api call 0x00000080 with result 0xfffffff0 Feb 9 16:59:56 mythbox kernel: ivtv0 warning: Encoder firmware dead! Feb 9 16:59:56 mythbox kernel: ivtv0: Error initializing firmware Feb 9 16:59:56 mythbox kernel: ivtv0: Error -19 on initialization If I modprobe -r ivtv then modprobe ivtv again it has a different error: Feb 9 17:02:18 mythbox kernel: firmware_loading_store: unexpected value (0) Feb 9 17:02:18 mythbox kernel: ivtv0: unable to open firmware v4l-cx2341x-enc.fw (must be 262144 bytes) Feb 9 17:02:18 mythbox kernel: ivtv0: did you put the firmware in the hotplug firmware directory? Feb 9 17:02:18 mythbox kernel: ivtv0 warning: failed loading encoder firmware Feb 9 17:02:18 mythbox kernel: ivtv0 warning: Error loading firmware -3! Feb 9 17:02:18 mythbox kernel: ivtv0: Error -3 initializing firmware. If I remove it and modprobe again, it works! This sequence is 100% repeatable. Going back to 0.7.1 on 2.6.17 eliminates the errors. Any ideas anyone? Thanks, J. _______________________________________________ atrpms-users mailing list [email protected] http://lists.atrpms.net/mailman/listinfo/atrpms-users
