Hi, For a while I use atrpms to manage mythtv and the drivers for my PVR-350 card. Since I updated to ivtv kmdl driver 0.10.1, TV out on my PVR-350 card is not working anymore.
When I load the ivtv kernel module, I get a strange picture on my TV, a grey screen with some diagonal lines. Playing back an mpeg file (cat test.mpg > /dev/video16) seems to work, but the picture is garbled. Card must be OK, when I try the 0.10.1 driver and do the cat test.mpg > /dev/video16 I get a good picture. I am currently using the 0.9.1 ivtv kernel module, because with 0.10.1 I cannot even load the ivtv-fb driver (unknown symbols), which is necessary for mythtv. Here's the output of the ivtv driver: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.9.1 (tagged release) loading ivtv: Linux version: 2.6.19-1.2288.fc5smp SMP mod_unload 686 REGPARM 4KSTACKS ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23415 based) ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 16 (level, low) -> IRQ 16 ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) msp3400 1-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0) msp3400 1-0040: MSP4418G-A2 supports nicam and radio, mode is autodetect and autoselect i2c_adapter i2c-1: Client creation failed at 0x44 (-1) lirc_i2c: chip found @ 0x18 (Hauppauge IR) lirc_dev: lirc_register_plugin: sample_rate: 10 saa7127 1-0044: saa7127 found @ 0x88 (ivtv i2c driver #0) tveeprom 1-0050: Hauppauge model 48134, rev J347, serial# 7013431 tveeprom 1-0050: tuner model is LG TP18PSB01D (idx 47, type 28) tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04) tveeprom 1-0050: audio processor is MSP4418 (idx 25) tveeprom 1-0050: decoder processor is SAA7115 (idx 19) tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter ivtv0: Autodetected Hauppauge WinTV PVR-350 ivtv0: Encoder revision: 0x02060039 ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011, 0x02040024 or 0x02050032. ivtv0: Decoder revision: 0x02020023 ivtv0: Registered device video0 for encoder MPEG ivtv0: Registered device video32 for encoder YUV ivtv0: Registered device vbi0 for encoder VBI ivtv0: Registered device video24 for encoder PCM audio ivtv0: Registered device radio0 for encoder radio ivtv0: Registered device video16 for decoder MPEG ivtv0: Registered device vbi8 for decoder VBI ivtv0: Registered device vbi16 for decoder VOUT ivtv0: Registered device video48 for decoder YUV ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) tuner 1-0061: type set to 28 (LG PAL_BG+FM (TPI8PSB01D)) ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 ivtv: ==================== END INIT IVTV ==================== Versions: ivtv_xdriver-0.10.7-8_r3843.fc5.at ivtv-0.10.1-126.fc5.at perl-Video-ivtv-0.13-8.fc5.at ivtv-firmware-20070217-13.at ivtv-kmdl-2.6.19-1.2288.fc5smp-0.9.1-123.fc5.at kernel-smp-2.6.19-1.2288.fc5 video4linux-kmdl-2.6.19-1.2288.fc5smp-20070302-78.fc5.at Hope anyone can help. It used to work very well. Best regards, Jurgen Goedbloed. _______________________________________________ atrpms-users mailing list [email protected] http://lists.atrpms.net/mailman/listinfo/atrpms-users
