Maybe try commenting out the lines (41-43) in the file BUILD/myatscc_ lexer.dats
it should look like below after commenting out // #include // "$PATSHOMELOCS\ // /atscntrb-hx-parcomb/mylibies.hats" and then insert the following line directly below #include "./../node_modules/atscntrb-hx-parcomb/mylibies.hats" On Saturday, March 16, 2019 at 2:05:28 AM UTC-4, Matt Chelen wrote: > > Thanks, that worked. Now I have a new issue. > > make -C utils/myatscc copy build clean > make[1]: Entering directory '/home/mattc/ATS2-Postiats/utils/myatscc' > \ > cp -f DATS/*.?ats BUILD/. > \ > make \ > -C BUILD -f ../Makefile_build > make[2]: Entering directory '/home/mattc/ATS2-Postiats/utils/myatscc/BUILD' > /home/mattc/ATS2-Postiats/bin/patsopt --output myatscc_main_dats.c > --dynamic myatscc_main.dats > /home/mattc/ATS2-Postiats/utils/myatscc/BUILD/myatscc_lexer.dats: > 542(line=41, offs=1) -- 602(line=43, offs=36): error(1): the file > [$PATSHOMELOCS/atscntrb-hx-parcomb/mylibies.hats] is not available for > inclusion. > /home/mattc/ATS2-Postiats/utils/myatscc/BUILD/myatscc_parser.dats: > 274(line=21, offs=1) -- 334(line=23, offs=36): error(1): the file > [$PATSHOMELOCS/atscntrb-hx-parcomb/mylibies.hats] is not available for > inclusion. > patsopt(TRANS1): there are [2] errors in total. > exit(ATS): uncaught exception: > _2home_2hwxi_2Research_2ATS_2dPostiats_2src_2pats_error_2esats__FatalErrorExn(1025) > make[2]: *** [../Makefile_build:69: myatscc_main_dats.c] Error 1 > make[2]: Leaving directory '/home/mattc/ATS2-Postiats/utils/myatscc/BUILD' > make[1]: *** [Makefile:18: build] Error 2 > make[1]: Leaving directory '/home/mattc/ATS2-Postiats/utils/myatscc' > make: *** [Makefile_dist:95: utl_myatscc] Error 2 > > The file it can't find seems to be related to this variable that is set in > utils/myatscc/Makefile_build. > > ###### > # > export \ > PATSHOMELOCS=\ > ./node_modules:./../../node_modules > # > ###### > > The variable is in utils/myatscc/node_modules/atscntrb-hx-parcomb, but > there is no node_modules folder in the root folder, which is two levels up > from that folder and it probably can't create a symbolic link (since it > couldn't read one), so perhaps that's the issue? > > Thanks again, > > On Wednesday, March 13, 2019 at 8:50:18 AM UTC-4, gmhwxi wrote: >> >> Here is my *guess*: >> >> atspre_staload.hats is currently a symbolic link. The error message seems >> to show that >> the symbolic link was incorrectly treated as a regular file. If you >> remove atspre_staload.hats >> and then copy HATS/atspre_staload_prelude.hats to atspre_staload.hats, >> you can check to see if >> things will work out. You may have to do the same for >> atspre_staload_libats_ML.dats. >> >> >> >> On Tue, Mar 12, 2019 at 2:41 PM Matt Chelen <mattc...@gmail.com> wrote: >> >>> As per the instructions on the download page, I downloaded ATS2 via the >>> tar file and attempted to build it in Cygwin. The Makefile threw an error >>> about a missing separator on line 1 (which is apparently not an uncommon >>> error?) and converting it between ANSI and UTF-8 didn't solve that, so I >>> bypassed it and attempted to build with Makefile_dist, since the Makefile >>> was simply a reference to it. >>> >>> I am currently getting this error: >>> >>> make[2]: Entering directory >>> '/home/mattc/ATS2-Postiats/utils/atscc/BUILD' >>> rm -f *~ >>> rm -f *_?ats.o >>> rm -f *_?ats.c >>> "/home/mattc/ATS2-Postiats"/bin/patsopt --output patscc_dats.c --dynamic >>> patscc.dats >>> /home/mattc/ATS2-Postiats/share/atspre_staload.hats: 1(line=1, offs=1) >>> -- 5(line=1, offs=5): error(parsing): the token is discarded. >>> exit(ATS): uncaught exception: >>> _2home_2hwxi_2Research_2ATS_2dPostiats_2src_2pats_error_2esats__FatalErrorExn >>> (1025) >>> make[2]: *** [../Makefile_build:38: patscc_dats.c] Error 1 >>> make[2]: Leaving directory '/home/mattc/ATS2-Postiats/utils/atscc/BUILD' >>> make[1]: *** [Makefile:18: build] Error 2 >>> make[1]: Leaving directory '/home/mattc/ATS2-Postiats/utils/atscc' >>> make: *** [Makefile_dist:88: utl_atscc] Error 2 >>> >>> I am unsure of what that means or how to solve it, as I have yet to work >>> with ATS2 at all and documentation seems to be limited. I know that others >>> have successfully built ATS2 in Cygwin, so I am confused as to what I am >>> doing wrong. >>> >>> Any help is appreciated. Thanks in advance! >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "ats-lang-users" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to ats-lang-user...@googlegroups.com. >>> To post to this group, send email to ats-lan...@googlegroups.com. >>> Visit this group at https://groups.google.com/group/ats-lang-users. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/ats-lang-users/76304693-f80c-466f-a853-4a8e4e8ca0d4%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/ats-lang-users/76304693-f80c-466f-a853-4a8e4e8ca0d4%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- You received this message because you are subscribed to the Google Groups "ats-lang-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to ats-lang-users+unsubscr...@googlegroups.com. To post to this group, send email to ats-lang-users@googlegroups.com. Visit this group at https://groups.google.com/group/ats-lang-users. To view this discussion on the web visit https://groups.google.com/d/msgid/ats-lang-users/98b6827d-d476-4096-b5a4-c9373f4328d5%40googlegroups.com.
