All,Sorry it has been so long, but I went on vacation after the last attempts.
I still don't have my remote working. To be clear, I want to get the number
buttons and several others (so I can select channels) working with my
aTV/mythbuntu and H688 remote. I tried the files that Robert shared. I used the
website and loaded the Plex device information. It does not work, at all. I
checked with irw and a few of the buttons emit a code, but most do not. I
expect I am missing something simple. I would appreciate someone who has done
it taking just a minute to lay out the steps in case I am missing something
that should be obvious. Thanks.Rusty-----Original Message-----From: "DFishburn"
[[email protected]]date: 08/08/2009 08:32 PMTo: "atv-bootloader"
Subject: Re: [atv-bootloader] Re: Best remote option for MythTVNote: Original
message sent as attachment
------------------------------------------------------------
Click for a wide selection of quality scales.
Scale
http://tagline.excite.com/fc/FgElN1gvzpWl3G7nBbDtcABP6k62fURe9hegsaeD4KVpsJguSPYbw0jhvhe/
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to [email protected]
For more options, visit this group at
http://groups.google.com/group/atv-bootloader?hl=en
-~----------~----~----~----~------~----~------~--~---
--- Begin Message ---
On Aug 2, 12:03 pm, "Rusty Lingenfelter" <[email protected]> wrote:
> I am using my atv with Mythbuntu. I have it working pretty much as I want it
> with the exception of the remote. 6 buttons are just not enough. I need the
> number keys, an 'i' etc. I know how to configure lirc, but the bottom line is
> that I need about 20 buttons, 10 for 0-9 and about 10 others to get all of
> the functions I use.
I use the Harmony 670.
I followed the instructions and created about 54 button codes.
I remember having some difficulties and posted on this group about the
details of it.
That is one of the reasons I did so many codes, if I did find one that
didn't work so well I just used a different one.
I have 2 appleTVs. I use the same .lirc between them.
I can send or post mine if you want, but the issue is your Logitech
software has to record them as well so that you can assign it to the
correct button on the remote. It is a combination thing.
Have a look at some previous posts by me (responses generally there
are not many) and the wiki I think I had some input into it as well.
If you are still having issues post back, don't give up.
Dave
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to [email protected]
For more options, visit this group at
http://groups.google.com/group/atv-bootloader?hl=en
-~----------~----~----~----~------~----~------~--~---
--- End Message ---
