bootloader dmesg:
Linux version 2.6.39 (root@thansen-MP061) (gcc version 4.5.2 (Ubuntu/
Linaro 4.5.2-8ubuntu4) ) #2 Sun Jun 5 22:45:22 MDT 2011
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
BIOS-e820: 000000000008f000 - 0000000000090000 (ACPI NVS)
BIOS-e820: 0000000000090000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000a0000 - 00000000000c0000 (reserved)
BIOS-e820: 0000000000100000 - 00000000025ae000 (usable)
BIOS-e820: 0000000002b07000 - 0000000002b58000 (reserved)
BIOS-e820: 0000000002b58000 - 000000000f171000 (usable)
BIOS-e820: 000000000f171000 - 000000000f372000 (ACPI NVS)
BIOS-e820: 000000000f372000 - 000000000febd000 (usable)
BIOS-e820: 000000000febd000 - 000000000febf000 (ACPI NVS)
BIOS-e820: 000000000febf000 - 000000000fec0000 (ACPI data)
BIOS-e820: 000000000fec0000 - 000000000feef000 (ACPI NVS)
BIOS-e820: 000000000feef000 - 000000000fef1000 (usable)
BIOS-e820: 000000000fef1000 - 000000000feff000 (ACPI data)
BIOS-e820: 000000000feff000 - 000000000ff00000 (usable)
BIOS-e820: 000000000ff00000 - 0000000010000000 (reserved)
BIOS-e820: 00000000f00f8000 - 00000000f00f9000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fffa0000 - 00000000fffd0000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE
kernel!
DMI 2.4 present.
DMI: Apple Inc. AppleTV1,1/Mac-F4228DC8, BIOS ATV11.88Z.
00D9.B00.0703012002 03/01/07
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==>
(reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0xff00 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFE00000 mask FFFE00000 write-protect
1 base 000000000 mask FF0000000 write-back
2 base 00FF00000 mask FFFF00000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
PAT not supported by CPU.
initial memory mapped : 0 - 01c00000
Base memory trampoline at [c009e000] 9e000 size 4096
init_memory_mapping: 0000000000000000-000000000ff00000
0000000000 - 0000400000 page 4k
0000400000 - 000fc00000 page 2M
000fc00000 - 000ff00000 page 4k
kernel direct mapping tables up to ff00000 @ 199e000-19a3000
RAMDISK: 019a3000 - 02000000
ACPI: RSDP 000f8000 00024 (v02 APPLE )
ACPI: XSDT 0fefd1c0 00064 (v01 APPLE Apple00 000000D9 01000013)
ACPI: FACP 0fefb000 000F4 (v03 APPLE Apple00 000000D9 Loki 0000005F)
ACPI: DSDT 0fef4000 02BE5 (v01 APPLE AppleTV 00010001 INTL 20050309)
ACPI: FACS 0fec0000 00040
ACPI: HPET 0fefa000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: APIC 0fef9000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: MCFG 0fef8000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: ASF! 0fef7000 000A0 (v32 APPLE Apple00 00000001 Loki 0000005F)
ACPI: SSDT 0fef2000 001A6 (v01 APPLE Cpu0Ist 00003000 INTL 20050309)
ACPI: SSDT 0fef3000 00158 (v01 APPLE Cpu0Cst 00003001 INTL 20050309)
ACPI: SSDT 0fef1000 004DC (v01 APPLE CpuPm 00003000 INTL 20050309)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
255MB LOWMEM available.
mapped low ram: 0 - 0ff00000
low ram: 0 - 0ff00000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x0000ff00
HighMem empty
Movable zone start PFN for each node
early_node_map[7] active PFN ranges
0: 0x00000010 -> 0x0000008f
0: 0x00000090 -> 0x000000a0
0: 0x00000100 -> 0x000025ae
0: 0x00002b58 -> 0x0000f171
0: 0x0000f372 -> 0x0000febd
0: 0x0000feef -> 0x0000fef1
0: 0x0000feff -> 0x0000ff00
On node 0 totalpages: 63140
free_area_init_node: node 0, pgdat c18b9180, node_mem_map cfcbd200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 478 pages used for memmap
Normal zone: 58679 pages, LIFO batch:15
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
nr_irqs_gsi: 40
Allocating PCI resources starting at 10000000 (gap: 10000000:e00f8000)
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages:
62630
Kernel command line: atv-boot=manual
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (00000000:00000000)
Memory: 234012k/261120k available (6460k kernel code, 18548k reserved,
2486k data, 372k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xd0700000 - 0xff7fe000 ( 752 MB)
lowmem : 0xc0000000 - 0xcff00000 ( 255 MB)
.init : 0xc18bd000 - 0xc191a000 ( 372 kB)
.data : 0xc164f3dd - 0xc18bcf80 (2486 kB)
.text : 0xc1000000 - 0xc164f3dd (6460 kB)
Checking if this processor honours the WP bit even in supervisor
mode...Ok.
NR_IRQS:288
CPU 0 irqstacks, hard=cf808000 soft=cf80a000
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1000.011 MHz processor.
Calibrating delay loop (skipped), value calculated using timer
frequency.. 2000.35 BogoMIPS (lpj=3333370)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Genuine Intel(R) processor 1.00GHz stepping 08
ACPI: Core revision 20110316
Performance Events: p6 PMU driver.
... version: 0
... bit width: 32
... generic registers: 2
... value mask: 00000000ffffffff
... max period: 000000007fffffff
... fixed-purpose events: 0
... event mask: 0000000000000003
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xf0000000-0xffffffff] (base 0xf0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xf0000000-0xffffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in ACPI
motherboard resources
PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base
0xf0000000) (size reduced!)
PCI: Using MMCONFIG for extended config space
PCI: Ignoring host bridge windows from ACPI; if necessary, use
"pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
(ignored)
pci_root PNP0A08:00: host bridge window [mem 0x10000000-0xfebfffff]
(ignored)
pci 0000:00:00.0: [8086:27a0] type 0 class 0x000600
pci 0000:00:01.0: [8086:27a1] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:07.0: [8086:27a3] type 0 class 0x001101
pci 0000:00:07.0: reg 10: [mem 0x22304000-0x22304fff]
pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0x22300000-0x22303fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0x2020-0x203f]
pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0x22305000-0x223053ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
pci 0000:00:1f.1: reg 10: [io 0x2058-0x205f]
pci 0000:00:1f.1: reg 14: [io 0x2064-0x2067]
pci 0000:00:1f.1: reg 18: [io 0x2050-0x2057]
pci 0000:00:1f.1: reg 1c: [io 0x2060-0x2063]
pci 0000:00:1f.1: reg 20: [io 0x2040-0x204f]
pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
pci 0000:01:00.0: [10de:01d7] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0x21000000-0x21ffffff]
pci 0000:01:00.0: reg 14: [mem 0x10000000-0x1fffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0x20000000-0x20ffffff 64bit]
pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can
enable it with 'pcie_aspm=force'
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.0: bridge window [mem 0x20000000-0x21ffffff]
pci 0000:00:01.0: bridge window [mem 0x10000000-0x1fffffff 64bit
pref]
pci 0000:02:00.0: [14e4:4328] type 0 class 0x000280
pci 0000:02:00.0: reg 10: [mem 0x22200000-0x22203fff 64bit]
pci 0000:02:00.0: reg 18: [mem 0x22000000-0x220fffff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can
enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0x22200000-0x222fffff]
pci 0000:00:1c.0: bridge window [mem 0x22000000-0x220fffff 64bit
pref]
pci 0000:03:03.0: [10ec:8139] type 0 class 0x000200
pci 0000:03:03.0: reg 10: [io 0x1000-0x10ff]
pci 0000:03:03.0: reg 14: [mem 0x22100000-0x221000ff]
pci 0000:03:03.0: supports D1 D2
pci 0000:03:03.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:03:03.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1e.0: bridge window [mem 0x22100000-0x221fffff]
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref]
(disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive
decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff]
(subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0,
disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io
+mem,owns=none,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000008f000 - 000000000008ffff
reserve RAM buffer: 00000000025ae000 - 0000000003ffffff
reserve RAM buffer: 000000000f171000 - 000000000fffffff
reserve RAM buffer: 000000000febd000 - 000000000fffffff
reserve RAM buffer: 000000000fef1000 - 000000000fffffff
reserve RAM buffer: 000000000ff00000 - 000000000fffffff
cfg80211: Calling CRDA to update world regulatory domain
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0x10000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xf0000000-0xf3ffffff]
pnp 00:01: [mem 0xfed14000-0xfed17fff]
pnp 00:01: [mem 0xfed18000-0xfed18fff]
pnp 00:01: [mem 0xfed19000-0xfed19fff]
pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
pnp 00:01: [mem 0xfed20000-0xfed8ffff]
system 00:01: [mem 0xf0000000-0xf3ffffff] could not be reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0000-0x001f]
pnp 00:02: [io 0x0081-0x0091]
pnp 00:02: [io 0x0093-0x009f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [mem 0xff000000-0xffffffff]
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfed00000-0xfed003ff]
system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:05: [io 0x00f0]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x002e-0x002f]
pnp 00:06: [io 0x004e-0x004f]
pnp 00:06: [io 0x0061]
pnp 00:06: [io 0x0063]
pnp 00:06: [io 0x0065]
pnp 00:06: [io 0x0067]
pnp 00:06: [io 0x0070]
pnp 00:06: [io 0x0080]
pnp 00:06: [io 0x0092]
pnp 00:06: [io 0x00b2-0x00b3]
pnp 00:06: [io 0x0680-0x06ef]
pnp 00:06: [io 0x0800-0x080f]
pnp 00:06: [io 0x0810-0x0817]
pnp 00:06: [io 0x0400-0x047f]
pnp 00:06: [io 0x0500-0x053f]
pnp 00:06: [io 0x1640-0x164f]
pnp 00:06: disabling [io 0x1640-0x164f] because it overlaps
0000:00:1e.0 BAR 7 [io 0x1000-0x1fff]
system 00:06: [io 0x0680-0x06ef] has been reserved
system 00:06: [io 0x0800-0x080f] has been reserved
system 00:06: [io 0x0810-0x0817] has been reserved
system 00:06: [io 0x0400-0x047f] has been reserved
system 00:06: [io 0x0500-0x053f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io 0x0070-0x0077]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
b43-pci-bridge 0000:02:00.0: enabling device (0000 -> 0002)
b43-pci-bridge 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
b43-pci-bridge 0000:02:00.0: setting latency timer to 64
ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x12, vendor 0x4243)
ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0B, vendor 0x4243)
ssb: Core 2 found: PCI-E (cc 0x820, rev 0x02, vendor 0x4243)
ssb: Core 3 found: PCI (cc 0x804, rev 0x0D, vendor 0x4243)
ssb: Core 4 found: USB 1.1 Host (cc 0x817, rev 0x04, vendor 0x4243)
ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
pci 0000:01:00.0: no compatible bridge window for [mem
0xfffe0000-0xffffffff pref]
pci 0000:00:1c.0: BAR 7: assigned [io 0x3000-0x3fff]
pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem 0x20000000-0x21ffffff]
pci 0000:00:01.0: bridge window [mem 0x10000000-0x1fffffff 64bit
pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0x22200000-0x222fffff]
pci 0000:00:1c.0: bridge window [mem 0x22000000-0x220fffff 64bit
pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03]
pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1e.0: bridge window [mem 0x22100000-0x221fffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 1 [mem 0x20000000-0x21ffffff]
pci_bus 0000:01: resource 2 [mem 0x10000000-0x1fffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0x22200000-0x222fffff]
pci_bus 0000:02: resource 2 [mem 0x22000000-0x220fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0x22100000-0x221fffff]
pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 256 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 6516k freed
microcode: CPU0 sig=0x6d8, pf=0x8, revision=0x21
microcode: Microcode Update Driver: v2.00
<[email protected]>, Peter Oruba
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
DLM (built May 29 2011 00:18:34) installed
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Installing knfsd (copyright (C) 1996 [email protected]).
NTFS driver 2.1.30 [Flags: R/W].
ROMFS MTD (C) 2007 Red Hat, Inc.
fuse init (API version 7.16)
JFS: nTxBlock = 1879, nTxLock = 15033
SGI XFS with ACLs, security attributes, realtime, large block/inode
numbers, no debug enabled
SGI XFS Quota Management subsystem
BeFS version: 0.9.3
Btrfs loaded
msgmni has been set to 469
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:1c.0: setting latency timer to 64
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/
input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Linux agpgart interface v0.103
ipmi message handler version 39.2
[drm] Initialized drm 1.1.0 20060810
nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nouveau 0000:01:00.0: setting latency timer to 64
[drm] nouveau 0000:01:00.0: Detected an NV40 generation card
(0x046700a3)
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 05.72.22.68
[drm] nouveau 0000:01:00.0: TMDS table version 1.1
[drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed
[drm] nouveau 0000:01:00.0: BIT table 'd' not found
[drm] nouveau 0000:01:00.0: Found Display Configuration Block version
3.0
[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 04021112 00000000
[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 020321f1 0081c01c
[drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 10 2
[drm] nouveau 0000:01:00.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff
[drm] nouveau 0000:01:00.0: 1: 0x00001161: type 0x61 idx 1 tag 0x07
[drm] nouveau 0000:01:00.0: 2: 0x00000213: type 0x13 idx 2 tag 0xff
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset
0xD0F9
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset
0xD3FD
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset
0xD91A
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset
0xDA95
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset
0xDC0A
[drm] nouveau 0000:01:00.0: 1 available performance level(s)
[drm] nouveau 0000:01:00.0: 0: memory 720MHz core 360MHz fanspeed 100%
[drm] nouveau 0000:01:00.0: c: memory 729MHz core 360MHz
[TTM] Zone kernel: Available graphics memory: 120264 kiB.
[TTM] Initializing pool allocator.
[drm] nouveau 0000:01:00.0: Detected 64MiB VRAM
[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder
(output 0)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output
1)
No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
[drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x49000, bo
cdd63a00
Console: switching to colour frame buffer device 128x48
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
brd: module loaded
loop: module loaded
nbd: registered device at major 43
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: power state changed by ACPI to D0
ata_piix 0000:00:1f.1: power state changed by ACPI to D0
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x2058 ctl 0x2064 bmdma 0x2040 irq 18
ata2: PATA max UDMA/100 cmd 0x2050 ctl 0x2060 bmdma 0x2048 irq 18
8139too: 8139too Fast Ethernet driver 0.9.28
8139too 0000:03:03.0: enabling device (0000 -> 0003)
8139too 0000:03:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
8139too 0000:03:03.0: setting latency timer to 64
8139too 0000:03:03.0: eth0: RealTek RTL8139 at 0xd08ec000,
00:17:f2:f8:40:aa, IRQ 20
b43-phy0: Broadcom 4321 WLAN found (core revision 11)
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
b43 ssb0:0: wlan0: Features changed: 0x00004800 -> 0x00004000
Broadcom 43xx driver loaded [ Features: PN, Firmware-ID: FW13 ]
Broadcom 43xx-legacy driver loaded [ Features: PID, Firmware-ID:
FW10 ]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002)
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1d.7: irq 21, io mem 0x22305000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 21, io base 0x00002020
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new interface driver uas
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-usbat
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
i801_smbus 0000:00:1f.3: enabling device (0000 -> 0001)
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
coretemp: CPU (model=0xd) has no thermal sensor
cpuidle: using governor ladder
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
sctp: Hash tables configured (established 8192 bind 16384)
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Using IPI Shortcut mode
rtc_cmos 00:07: setting system clock to 2011-07-22 18:52:18 UTC
(1311360738)
ata1.00: ATA-5: TOSHIBA MK4019GAX, FA003G, max UDMA/100
ata1.00: 78140160 sectors, multi 16: LBA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK4019GA FA00 PQ: 0
ANSI: 5
sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: detected capacity change from 0 to 40007761920
sd 0:0:0:0: Attached scsi generic sg0 type 0
GPT:Primary header thinks Alt. header is not at the end of the disk.
GPT:78140158 != 78140159
GPT:Alternate GPT header not at the end of the disk.
GPT:78140158 != 78140159
GPT: Use GNU Parted to correct GPT errors.
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 372k freed
usb 1-1: new high speed USB device number 2 using ehci_hcd
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 2-2: new low speed USB device number 2 using uhci_hcd
Refined TSC clocksource calibration: 1000.035 MHz.
Switching to clocksource tsc
apple 0003:05AC:8241.0001: hiddev0,hidraw0: USB HID v1.11 Device
[Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.0-2/input0
usb 1-1.4: new low speed USB device number 4 using ehci_hcd
REISERFS warning (device sda1): super-6502 reiserfs_getopt: unknown
mount option "force"
EXT3-fs (sda2): error: couldn't mount because of unsupported optional
features (240)
EXT2-fs (sda2): error: couldn't mount because of unsupported optional
features (240)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
(null)
8139too 0000:03:03.0: eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
--
To post to this group, send email to [email protected]
For more options, visit this group at
http://groups.google.com/group/atv-bootloader?hl=en
