GaryB Wrote: > Mike, > You really need some understanding of the circuit to do this without > destroying your squeezebox. The two inductors that I called L8 and L9 > in my post are hooked up directly to the SP/DIF digital output and > provide a little bit of smoothing of the sharp digital output waveform. > I think some of the folks in the UK who modify the Squeezebox > professionally first pointed these out. > > So the question is whether L1 and L5 connect directly to the output? > If so then you are probably on the right track. > > Be careful in there. > > ---Gary
Gary: I do understand the circuit, but I was thrown off by the numbering. Yes, L1 and L5 trace directly from the SPDIF output pin (see pic - circled). They trace from pin 1 or 2 on the Xilinx chip through the two resistors you mentioned - in SB2 they are R2 and R3. I just wanted to clarify what you meant by the "junction" of the resistors in your original post. Thanks for your concern. I think I will get it right - I just want to double check before removing SMDs. They are very tough to work on. BTW, I have returned L8/L9 to their homes. +-------------------------------------------------------------------+ |Filename: sb2_inside_3.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=919| +-------------------------------------------------------------------+ -- mamsterla ------------------------------------------------------------------------ mamsterla's Profile: http://forums.slimdevices.com/member.php?userid=469 View this thread: http://forums.slimdevices.com/showthread.php?t=19822 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/audiophiles
