seanadams Wrote: > IIRC setting the preamp control to maximum attenuation will effect a > partial shutdown of the DAC, lowering the noise level a bit below what > you'd get otherwise get playing "all zeroes". This may be useful for > some auto-sensing amplifiers which require a lower noise level to think > that the source is "off". There was some discussion of this a while ago > and I thought a feature request was entered (related to s/pdif shutoff > request), but I can't find it now...
Any updates on this feature request? The analog outs are not quiet enough to shut down the Paradigm Active/20s. As long as the SB is connected to the speakers' analog ins, they think there's a signal coming through (even when the SB is in its "off" mode). This may have more to do with noise/interference that creeps into the analog outs. I have to do more experimenting, but I've noticed that my right speaker (which is close to the SB) emits a bit of a high-pitched tone when connected to the SB analog out. The headphone output is also plauged by similar noise. I'll create a separate post to see if others have the same issue or if maybe this is just a hardware problem in my SB. -- banzai ------------------------------------------------------------------------ banzai's Profile: http://forums.slimdevices.com/member.php?userid=5008 View this thread: http://forums.slimdevices.com/showthread.php?t=22999 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/audiophiles
