> > Any tips? I should be trying this in the next few days and any > suggestions would be appreciated. > Steve
Hugh (Inguz) had some nice step-by-step instructions posted somewhere to get you started. Basically, you record the sweep played through a speaker on one channel using the mic, and you record the analogue out of your SB or DAC on the other channel. Then you do the same for the other speaker. I think the key is to play long sweeps (I've been using 60 seconds, but might try longer) as loud as possible, and to do it at a time when there is as little background noise as possible (very early mornings here). To determine the loudest volume your speakers can tolerate is a bit tricky. You can use a voltmeter to measure the amount of power being dissipated in them, or search the web and you'll find various methods. Also, make sure you place the mic at ear-level in your typical listening position, and aim it towards the speaker you're recording. -- opaqueice ------------------------------------------------------------------------ opaqueice's Profile: http://forums.slimdevices.com/member.php?userid=4234 View this thread: http://forums.slimdevices.com/showthread.php?t=24519 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/audiophiles
