P Floding;180272 Wrote: > No problem either. The XLR will have one signal pin connected to earth, > and the other connected to the single-ended signal coming in from the > 1/4". > > Since balanced inputs compare both incoming signals it doesn't matter > if it compares a single signal to earth, or two mirror image signals. > The only difference is that the signal will be half the voltage > (volume), a.k.a 6dB lower. > > Please don't make your own converters now, as you need to know what you > are doing with regards to output, input and also if transformers are > being used or not.
Which is why you go inside and set the jumper. Without doing so, the output goes from 24dBu to 18dBu on volume setting 56. Leaving the jumper alone will not harm anything, however. -Ben -- Ben Diss 'SB3' (http://www.slimdevices.com/pi_squeezebox.html) -> 'Lavry DA10' (http://www.lavryengineering.com/productspage_da_10.html) -> 'BAT VK-31SE' (http://www.balanced.com/products/line/Vk-31SE/index.html) -> 'Halo A21' (http://www.parasound.com/halo/a21.php) -> 'B&W 803D' (http://www.bwspeakers.com/index.cfm/fuseaction/products.models/label/Model%20803D) ------------------------------------------------------------------------ Ben Diss's Profile: http://forums.slimdevices.com/member.php?userid=4289 View this thread: http://forums.slimdevices.com/showthread.php?t=32699 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/audiophiles
