zork17;212188 Wrote: > > 1) Use the attenuation inside the Transporter and use it's 'digital' > volume.
You should be able to use the balanced XLR cables without any analog attenuation at all if your listening volume control is > 1/4 of the volume bar on the transporter. If you can't get above 1/4 volume on the transporter, you will need a passive resistor pack between them. I tested my transporter with an Atma-Sphere amp a while ago.. I powered everything off and connected XLR cables. I turned on the transporter and turned the volume control all the way down. I powered on the Atma-Sphere amp's tube warmers. Then I turned the amp section to on. I then started playing a track that would start out quiet, seemed ok, so I started turning up the volume when the VU meters were bouncing. We hit a low listening level around 1/2 volume, and a normal listening level around 3/4 volume. It was a perfect match. :) -- SuperQ ------------------------------------------------------------------------ SuperQ's Profile: http://forums.slimdevices.com/member.php?userid=2139 View this thread: http://forums.slimdevices.com/showthread.php?t=36550 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/audiophiles
