Hey all, I was wondering why there was a bunch of traffic to my website coming from this thread.... ;)
I'm the guy who did the microphone calibration for muski, feel free to ask me any questions about the calibration process. Like I told muski, I've measured a bunch of ECM8000's over the years and they're all very different. Part of the reason is that the Behringer (or their OEM) periodically changes the pre-amp electronics which can have dramatic effects - there was a thread on rec.audio.tech a few years ago where this discussion came up. The other reason (I suspect) is that you're not going to get the same process control in the manufacturing of a $30 mic that you're going to get in the manufacturing process of a $600 mic. They're still great mics, but you just can't swap on ECM8000 for another and still think you're getting the same thing. As for muski's experience with "brightness" with the curve I generated - that doesn't sound right. As you see in the plot at the to of the page, your specific microphone is very sensitive in the high frequencies. This should result in a reduction in the high frequencies in the calibrated output as compared with the Inguz response. -- Anechoic ------------------------------------------------------------------------ Anechoic's Profile: http://forums.slimdevices.com/member.php?userid=12412 View this thread: http://forums.slimdevices.com/showthread.php?t=36716 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/audiophiles
