*Isaac*;227245 Wrote: > I just measured the noise floor of my SB; it has a sharp peak at 7.9kHz > and at 17.8kHz. This seem to be related to the display, as the relative > level of the peaks change when the display brightness is changed, also > the peaks disappear when the brightness is turned down until the > display is off. > seems like a pretty significant and avoidable design weakness, I hope > R&D fix it in the next revision.
What do you mean by sharp? how far down is this peak. I'd hardly call this a significant weakness, since: a - you will never hear this in normal usage (see the OP for example of not normal!) b - you can turn the display to "off" - just like many expensive audio design - for the same reasons -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... ...SB3+TACT+Altmann+MF DACXV3/Linn tri-amped Aktiv 5.1 system and some very expensive cables ;o) ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=32045 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/audiophiles
