Yes, Gordon sorry, so aside from having to modify the cabinet a bit, it sounds like you were happy using the Madisound tweeter with the TC-50is - this is good to know!
Spica used a specific model of tweeter used in the 50 and a different on the 50i. The one Madisound sells isn't one of those, and the same tweeter presumably wouldn't work well both places. Spica changed tweeter models because production issues with the woofer used in the 50, made them move to a new model, used in what was dubbed as the 50i (BTW - TC-50is are not marked as such, you can only tell by the square tweeter hole, although the change took place about s/n 7500) Now to shift gears a bit, Spica did closely match components, they measured each cap, resistor, etc and the woofers response curves were individually characterized (see service codes) make certain that the left and right were matched. However, this was not true for the tweeters. Tweeters had enough uniformity that individual matching wasn't necessary within a given model. please reference: Spica Drivers: http://spicaspeakers.com/repair/spica-drivers.php Service Codes: http://spicaspeakers.com/repair/spica-service-codes.php -- dadster www.spicaspeakers.com ------------------------------------------------------------------------ dadster's Profile: http://forums.slimdevices.com/member.php?userid=15150 View this thread: http://forums.slimdevices.com/showthread.php?t=42522 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/audiophiles
