maxrob200;399695 Wrote: > Is it possible that the output from the Behringer is causing the input > on my amp to clip. I have read that the Behringer uses XLR pro level > outputs and the output voltage is something like 4 - 6 volts which may > be too much for most domestic amplifers. If that is so, how could I > attenuate the output from the Behringer, do I use potentiometers in > line?
STOP! You need to use the RCA (phono) outs from the SRC2496 into your amp. There is absolutely no point in using the XLR outputs unless your amp has them too. -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... SB3 (wired) - TACT 2.2X (Linear PSU) + Good Vibrations S/W - MF Triplethreat(Audiocom full mods) - Linn 5103 - Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Townsend Supertweeters, Blue Jeans Digital,Kimber Speaker & Chord Interconnect cables Outdoors: Boom ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=58967 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/audiophiles
