SuperQ;475738 Wrote: > The front is one of the warmer parts due to the VFD display heaters.
makes sense I guess.... although when using the digital input from the Beosound there's little going on on the display SuperQ;475738 Wrote: > > Back on the topic of audio quality, are you adjusting the volume on the > transporter at all? Do you notice it sounds louder or softer than the > other transports you use? A very small volume difference can mean a lot > to your ears when it comes to audio quality. volume is fixed at 100% in the settings, I use the Denon to control the volume level whilst I've been giving the system a bit of a belting testing it, these days I listen to much lower volumes.... damn tinnitus heh SuperQ;475738 Wrote: > > It might be worth doing this: Get a pink/white noise track and play it > back on different sources. You can measure the output to your speakers > either with a SPL meter or by directly measuring the voltage across the > speaker terminals with a good digital multi-meter. don't have either, and getting to the back of equipment is a notorious pain in the arse... all looks great with nought a cable in sight, but it means it took me over an hour just to switch out the old DAC with the TP hah! :D Themis;475852 Wrote: > Do you listen to your setup through the PURE DIRECT mode or through the > Audyssey EQ ? I have all of the naff auto room EQ and Audyssey disabled on the Denon When listening to music I only use either Pure Direct, or 5ch Stereo. ghostrider;475938 Wrote: > My TP barely gets warm, something else is generating the excess heat. > The VU meters are generated by SBS and are not available when using > digital inputs. hmmm strange, I can understand the TP getting a lot warmer than my old DAC given what it does, but like I said in comparison to the Denon which one would expect to get pretty toasty, the TP runs hotter after a good few hours.... how it runs hotter than something like the Denon just doesn't seem quite right to me? I'm sure having it in between the Rotel and Beyonwiz isn't helping matters and I expected it to get a bit warm in there, but no where near as hot as it's getting! Bugger that the VU meters aren't available using the digital inputs, is there any kind of mod or hack to enable this? (wishful thinking I'm sure!) One last question, is anyone using the TP with a Logitech Harmony universal remote? The setup software is highly annoying since it doesn't let you manually set up the remote the way one wants, though for most of my devices i've managed to get around the way it TELLS you how it should be setup... i've tried assigning the 'favourites' button and then the 'play' button to select the digital input (it's the only thing i've added to favourites), yet after the remote turns on the TP it doesn't do it... one would have thought given they're both Logitceh they'd work in "harmony" with each other -- FARQ ------------------------------------------------------------------------ FARQ's Profile: http://forums.slimdevices.com/member.php?userid=33718 View this thread: http://forums.slimdevices.com/showthread.php?t=70132 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/audiophiles
