mswlogo;544659 Wrote: > Thanks !! > > But you use the calibration file to set the levels !! > > It's also the file that is reporting the signal is distorted before > running the test.
Ah. I think we are at cross-purposes here. The test method I am using is: 1) generate the test file in RMAA (you only need to do this once) 2) play back on SB device using SBS and... 3) record analogue output from SB device into soundcard 4) use RMAA to analyse recorded file The calibration file is not required for any of this. It is use for speaker testing. -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... Touch(wired/XP) - TACT 2.2X (Linear PSU) + Good Vibrations S/W - MF Triplethreat(Audiocom full mods) - Linn 5103 - Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Townsend Supertweeters, Blue Jeans Digital,Kimber Speaker & Chord Interconnect cables Kitchen Boom, Outdoors: SB Radio ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=78451 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/audiophiles
