cliveb;578435 Wrote: > I think you have got to the core issue here. When I spoke of galvanic > isolation, I was thinking along these lines (that any leakages onto the > gound planes do not become part of the signal), but I used the wrong > terminology. Thank you for explaining it properly!
OK - I can see all of that. These AC leakage currents come from where? eddy currents induced in the casework? across the x-former secondary? Assuming the casework is correctly grounded - and the signal ground plane is also tied to the same ground... won't these currents tend to go to ground via the mains? (in an unbalanced design) -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... Touch(wired/XP) - TACT 2.2X (Linear PSU) + Good Vibrations S/W - MF Triplethreat(Audiocom full mods) - Linn 5103 - Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Pekin Tuner, Townsend Supertweeters, Blue Jeans Digital,Kimber Speaker & Chord Interconnect cables Kitchen Boom, Outdoors: SB Radio, Harmony One remote for everything. ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=82122 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/audiophiles
