krochat;604746 Wrote: > Phil, > > Sorry to break the news, but the TacT mic uses 9 volt phantom power - > the Tascam provides 48 volts. In all likelyhood you've fried the TacT > mic. You can try it with the RCS and see if it's working OK. > > If so, you need to make a 9v phantom power cable like this: > http://www.linearx.com/files/pdf/LVPcables.pdf > > Except you can use a 9v battery instead of the AC adapter shown. > > If you've fried your TacT mic, the LinearX M31 is a higher-quality > direct replacement and they will provide a TacT mic calibration file on > request. > > http://www.linearx.com/products/microphones/m31/M31_1.htm > > Good luck, > Kim
Good news - my tact mic is fine - it would appear that the US122L has inadequate gain for this mic. The mic works fine with the new mini mixing desk that arrived today :-) I'll be trying Audiolense to do some measurements at the weekend! -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... Touch(wired/XP) - TACT 2.2X (Linear PSU) + Good Vibrations S/W - MF Triplethreat(Audiocom full mods) - Linn 5103 - Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Pekin Tuner, Townsend Supertweeters, Blue Jeans Digital,Kimber Speaker & Chord Interconnect cables Kitchen Boom, Outdoors: SB Radio, Harmony One remote for everything. ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=84995 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/audiophiles
