It's going to be a long journey... First you need to the room measurements. You will need Audiolense (or siimilar), a good mic with a Flat response between 20hz and 15khz, a good mic stand, and a suspension mount for the mic. Then you need a USB interface for your PC like the one you already have in the pictures. You need to download and install INGUZ <it is free) from the Inguz website, follow the instructions provided.
Audiolense will creat the convolution file that is used by Inguz at playback time. LMS pipes the data through SOX into INGUZ to apply the DRC. Do you have an iPhone or iPad or iPod Touch? - the web UI for INGUZ no longer runs properly on recent browsers, but iPeng can control it fine on an iDevice. This isnt essential but it really helps a lot. Finally the will be some hacking around to be done and you will need the version of plugin.pm I posted.. And you will need to make a custom_convert.conf file... I can sort that out for you (much) later. I'm busy today, but I reckon someone with your experience can get as far as making the measurements and installing the basic Inguz package... It's the bits after that that you might need my help with. Regards Phil -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... Touch(wired/W7)+Teddy Pardo PSU - Audiolense 3.3/2.0+INGUZ DRC - MF M1 DAC - Linn 5103 - full Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Pekin Tuner, Townsend Supertweeters,VdH Toslink,Kimber 8TC Speaker & Chord Signature Plus Interconnect cables Stax4070+SRM7/II phones Kitchen Boom, Outdoors: SB Radio, Harmony One remote for everything. ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=93393 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/audiophiles
