Hello Steve, Steve Fisher: > I have tried to build auf3-standalone v 3.12.x (I also tried 3.12) into > the RaspberryPi Linux source code (Debian Wheezy - Raspbian) v. rip-3.12.y > but I have encountered the errors below. I have already successfully > completed this with earlier version of linux and aufs several times before > successfully, so I have probably forgotten to do something. I am cross > compiling on a Mac (10.9.5).
I am afraid you have failed applying aufs3-mmap.patch. All these symbols are defined in mm/prfile.c which is added by the patch. But,,, did you disable CONFIG_MMU? Hmm, I might have not tried compling it. aufs3-mmap.patch may have a problem with such configuration. Anyway, next time when you post, I'd ask you to include these info. (from aufs README file) ---------------------------------------------------------------------- - /proc/mounts (instead of the output of mount(8)) - /sys/module/aufs/* - /sys/fs/aufs/* (if you have them) - /debug/aufs/* (if you have them) - linux kernel version if your kernel is not plain, for example modified by distributor, the url where i can download its source is necessary too. - aufs version which was printed at loading the module or booting the system, instead of the date you downloaded. - configuration (define/undefine CONFIG_AUFS_xxx) - kernel configuration or /proc/config.gz (if you have it) - behaviour which you think to be incorrect - actual operation, reproducible one is better - mailto: aufs-users at lists.sourceforge.net ---------------------------------------------------------------------- J. R. Okajima ------------------------------------------------------------------------------ Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://pubads.g.doubleclick.net/gampad/clk?id=154624111&iu=/4140/ostg.clktrk
