It will take more than that to make my trailer look like it was a new Cobra ;)
Stuart Ferguson Sent from iPhone 0419 797508 On 31/08/2010, at 18:56, "Mal Bruce" <[email protected]> wrote: > Hi All, > > Mike from Camden Sailplanes said that you may well be interested in this > product as he has had a few enquiries > > This stuff is silicone free makes glider trailers look like they just came > from the cobra factory. > > Oxygone $34.95 and ULTRA-ION $79.95 additional buffing towels $16.00 > > For you bug smashers out there we have the best bug remover you have ever > used $34.95 > > Regards Mal > > 0411 196 255 > > [email protected] > > Yes I am a distributor. > > http://www.driwash.com.au/glider/ > > https://www.driwash.com.au/glider/customer/product_waterless_carwash.htm > > https://www.driwash.com.au/glider/customer/product_oxygone.htm > > > Product Information > > Don’t repaint that old vehicle! Restore the shine on older, dull painted > surfaces with OxyGone™. Quick, Easy and Inexpensive, OxyGone™, now with Ionic > Technology, gets rid of oxidation that dulls painted surfaces. All it takes > is a quick polish, a light rub to a haze, then buffing with a terry towel, > and the shine that you didn’t know was there is back again! OxyGone™ reverses > the damaging effects of sun, wind, and precipitation. It contains no > abrasives or ammonia, and no pre-washing is necessary when applying the > product. We’ve got the One-Two Punch for dull painted surface: bring back > that shine with OxyGone®, and keep that shine with DRI WASH ‘n GUARD® > Ultra-ION™ Waterless Carwash™. > > OxyGone® is great for: > > • Removing hard water spotting on your vehicle and other non-porous surface > • Cleaning plastic window material on jeeps, boats, and older convertible > tops > • Restoring aged items in gold, silver, glass or plastic. > > Instructions for Use: > > Pre-test on inconspicuous area before use. > > Invert bottle and shake vigorously for 5 seconds. > Apply a small amount of OxyGone™ on a clean terrycloth towel. > Using the towel, work the product into the oxidized surface until haze begins > to disappear. > Using another clean terry cloth towel, buff the treated surface to a gloss. > For best result work in small sections. > For ultimate surface restoration, use DRI WASH 'n GUARD® OxyGone™ on the > surface of the vehicle, and follow with DRI WASH 'n GUARD® Ultra-ION™ > Waterless Carwash™ and Protective Glaze. > > Directions by Machine: > > Invert bottle and shake vigorously for 5 seconds. > To prevent splatter, apply a small amount of OxyGone™ on a clean terrycloth > towel and spread over a 30cm area. > Buff to a high gloss using a conventional or orbital-type buffer equipped > with a foam-polishing pad. Do not exceed 2,400 RPM. > Caution: Use under well ventilated conditions. First Aid Treatment: If > swallowed, call physician or poison control centre immediately. > > Product Information > > DRI WASH 'n GUARD® ULTRA-ION™ WATERLESS CARWASH™ is the latest generation of > waterless car wash from DRI WASH 'n GUARD®, setting the benchmark world wide > in waterless car wash technology. It is specifically designed for the > sensitive 21st century paints used on cars manufactured since the year 2000, > but it is just as effective on any paint no matter it's age. Ionic Technology > helps repel dust from your vehicle's surface, and the exclusive PolyGuard-3™ > formula helps make existing minor feather scratching less noticeable as you > apply the product by hand or if you buff the painted surfaces. DRI WASH 'n > GUARD® ULTRA-ION™ WATERLESS CARWASH™ will give a deeper, richer shine than > any other product in the vehicle appearance industry. It is extremely > aggressive in emulsifying all organic matter as well as bugs, bird droppings > and tar. ULTRA-ION WATERLESS CARWASH™ works exceptionally well on glass, > mirrors and chrome on all vehicles, leaving a lasting protection! Because > only 60ml of DRI WASH 'n GUARD® ULTRA-ION™ is needed to clean and detail an > average car ULTRA-ION WATERLESS CARWASH™ is very economical. Where else can > you clean, polish, seal, AND protect your vehicle for under $10 in one easy > step. Dri Wash ‘n Guard® Waterless Carwash™ with exclusive Poly Guard-3™ is > so versatile that virtually any hard, non-porous surface can be cleaned, > polished, and protected without water; cars, boats, recreational vehicles, > diesel trucks, motorcycles, skis, buses, airplanes, windows, benchtops, > stoves, ovens and more! > > Listen to Rod Yanke, the creator of Ultra-ION™ Waterless Carwash, speak about > the reason Ultra-ION™ was developed and the benefits Ultra-ION provides to > you, your vehicles, and your home by clicking here. (File Size: 8Mb) > > Instructions for Use > > It is extremely important that DRI WASH 'n GUARD® ULTRA-ION™ be applied with > a DRI WASH 'n GUARD® AirSpray pump sprayer only. Use on hard, non-porous > surfaces only. Pre-test on an inconspicuous area before use. Can be used over > surface containing moderate level of dust, dirt, road grime or salt. > > Refill Procedures: > > Unscrew collar nut at neck of AIRosol pump sprayer and remove internal spray > mechanism > Invert bottle of product, shake vigorously for 15-20 seconds > Pour contents into AIRosol pump sprayer until 75% full > Re-Install spray mechanism and collar nut > Directions By Hand: > > Apply Dri Wash 'n Guard® ULTRA-ION™ in a cool, dry surface in a shaded area > for best results. Avoid windy conditions if possible. > Use a clean terry cloth towel to apply the product. Use the DWG™ Buffing > Towel for buffing. > Invert the AIRosol pump sprayer and shake vigorously for 15-20 seconds. > Pressurize the bottle by pumping the cap "up and down" until a strong > resistance is felt (approx. 10-15 times). > Spray a light coat of Dri Wash 'n Guard® ULTRA-ION™ Waterless Carwash™ on a > small section of vehicle (1sq.m.), spraying with a broad sweeping motion > where possible. > Using the terry cloth towel, with moderately firm pressure, rub polish > thoroughly over the sprayed area until the filmy haze that developed almost > disappears. > Buff the remaining haze to a high gloss with the DWG™ buffing towel > Directions by Machine (FOR PROFESSIONALS ONLY): > > Use a conventional or orbital-type buffer equipped with a foam-polishing pad. > Do not exceed 1,500 RPM. > Apply Dri Wash 'n Guard® ULTRA-ION as described in steps 3, 4, and 5 above. > Immediately buff sprayed area to a high gloss. > Continue, section by section, until all accessible areas have been buffed. > Polish any remaining areas by hand, if necessary. > For ultimate surface restoration, use DRI WASH 'n GUARD® OxyGone™ on the > surface of the vehicle, and follow with DRI WASH 'n GUARD® ULTRA-ION™ > Waterless Carwash™ and Protective Glaze. > > Caution: Prevent product from freezing. DO NOT MIX THIS PRODUCT WITH ANY > OTHER CHEMICAL OR WATER. First Aid Treatment: If swallowed, call physician or > poison control centre immediately. > > > > Product Description: > > The DWG Applicator towel made from 100% cotton terry cloth will lift dirt > into its pile, which is why it works well with Dri Wash 'n Guard®; dirt is > literally absorbed into the terry cloth after Dri Wash 'n Guard® lifts it > from the surface of the vehicle. Terry cloth is very important in the > application process. DO NOT substitute other types of cloths, even if they > are clean. > > The DWG Buffing Towel is made from a revolutionary yarn, consisting of > microscopic, wedge-shaped polyester filaments and a nylon core that causes it > to absorb quickly and efficiently, as well as allowing it to pick up dust and > micro-particles like a magnet. This thick, plush, blue towel is superior for > removing smudges, dust, oils and grease from virtually any surface, and will > buff DRI WASH ‘n GUARD® to a higher sheen faster than a normal terry cloth > towel. The DWG® Buffing towel is also instrumental in the ionic properties of > the Ultra-ION™ Waterless Carwash. In short, the unique materials and > construction that comprises this towel allows it to absorb all surface > particles, provide better polishing characteristics, and access the ionic > power of Waterless Carwash, giving you that deep-down shine without > scratching the surface of your vehicle. > > Instructions for use: > > The applicator towel is used to spread the Waterless Carwash product across a > surface after being applied using an AirSpray applicator. Finger tip pressure > is all that is needed as best results are achieved without excessive effort. > > The DWG® Buffing Towel is used to buff the Waterless Carwash off of a surface > after it has dried to a haze. Finger tip pressure is all that is needed as > best results are achieved without excessive effort. > > Ensure that you do not launder the towels with fabric softener as the fabric > softener will streak your vehicle on the next use of the towels. Best results > are achieved using dish washing detergent, and if necessary a whitening agent > for heavily stained COTTON towels. DO NOT BLEACH THE DWG® BUFFING TOWEL! > > _______________________________________________ > Aus-soaring mailing list > [email protected] > To check or change subscription details, visit: > http://lists.internode.on.net/mailman/listinfo/aus-soaring
_______________________________________________ Aus-soaring mailing list [email protected] To check or change subscription details, visit: http://lists.internode.on.net/mailman/listinfo/aus-soaring
