Hi, It is my experience that trying to get the SIP details from Telstra for a DOT service is near impossible, they have occasionally handed them out but they don't like doing so, I have been burnt by this exact issue when attempting to deploy a Cisco branch VPN service where DOT had previously been deployed to a central office.
I would recommend porting the number to a third party SIP provider (or Telstra non-DOT based SIP service if such an animal exists) and terminating the SIP connection on the hardware of your choice which puts the control back into your hands as well as giving you a far greater choice of routing hardware. Kind Regards, Jim. -----Original Message----- From: AusNOG <[email protected]> On Behalf Of TWIG Security Sent: Tuesday, 20 November 2018 12:36 PM To: [email protected] Subject: [AusNOG] Telstra DOT, VoIP HELP! Hi All, I am looking to upgrade a client from simple cordless phone (plugged directly into V7610 Modem on a DOT service ) to an mini IP-PBX as the cordless phone idea supplied by TBS is not cutting the mustard. Multi-building site with users in any one of 4 buildings. I have been trying on and off for a week to get the SIP Server and any proxy from the Business help desk for a week, and all they will provide is the user/pass for the VoIP service, saying they don't have access to the SIP details. I checked the modem and its a canned device (no access to anything other than User/Pass). Has anyone worked on this previously and know where I can get the required info, SIP details, preferred Codecs etc. Cheers, Mal _______________________________________________ AusNOG mailing list [email protected] http://lists.ausnog.net/mailman/listinfo/ausnog _______________________________________________ AusNOG mailing list [email protected] http://lists.ausnog.net/mailman/listinfo/ausnog
