Hi Jake, That's something that I wanted to check if it was needed/recommended.
Can certainly put it in if it will help achieve better performance and redundancy Thanks Radek On 25 Nov 2018, at 4:26 pm, Jacob Taylor <[email protected]<mailto:[email protected]>> wrote: Hi Radek, Not personally familiar with vPC, more so Arista MLAG and Juniper MC-AE. In the diagram there isn't a peer link between 13 & 14 - is that a mistake in the diagram or the actual design? If you intend to build 2x20G bonds to two standalone nexus switches, that'll work fine. If you are trying to achieve a 40G bowtie between the two pairs I'm fairly certain that won't work (unless Cisco has some special black magic to transport signalling/MAC synchronisation over the bond itself). Cheers, Jake On 25 Nov 2018, at 15:04, Radek Tkaczyk <[email protected]<mailto:[email protected]>> wrote: Hi Guys, I have a need to configure vPC on 4 x Cisco Nexus 3000 switches at one of our data centres - a design that we will replicate to other data centres as well. I think I have the config down pat, but I'd like someone with another pair of eyes to go over it with me to ensure it's 100% correct. Is there anyone who can give me a hand here with this configuration, happy to pay for someone's time to go over it to ensure we are doing this correctly. The Physical setup that I'm looking for: <image001.png> Thanks Radek _______________________________________________ AusNOG mailing list [email protected]<mailto:[email protected]> http://lists.ausnog.net/mailman/listinfo/ausnog
_______________________________________________ AusNOG mailing list [email protected] http://lists.ausnog.net/mailman/listinfo/ausnog
