Hi Pouya, We had this working on Cisco 1941 and 887VA routers last year, but have not tested on the model you specified. It is possible that it simply isn’t supported.
Thanks Brett Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 ________________________________ From: AusNOG <[email protected]> on behalf of Nathan Brookfield <[email protected]> Sent: Tuesday, April 9, 2019 12:37:34 PM To: [email protected]; [email protected] Subject: Re: [AusNOG] NBN NCAS on Cisco 867VAE-K9 Hi Pouya, It is my understanding and belief that firmware that supports the vectoring required by NBN is not available for this device. Happy to be corrected. Kindest Regards, Nathan Brookfield (VK2NAB) From: AusNOG <[email protected]> On Behalf Of Pouya Madani Sent: Tuesday, April 9, 2019 12:28 PM To: [email protected] Subject: [AusNOG] NBN NCAS on Cisco 867VAE-K9 Hi, Has anyone had any luck with configuring a Cisco 867VAE-K9 (not the 867VAE-W) on NBN NCAS? [VDSL handoff, and Vlan tag 100 on WAN (via AAPT)] I have almost tried any recommendations on AusNog, Whirpool, Cisco and many other Communities with no luck. I understand 867VAE chipset is different to 867VAE-W, and that 867VAE-W works just fine on NBN NCAS, but the 867VAE-K9 has not worked for me yet. Has anyone got an 867VAE-K9 working on NCAS by any chance, and if so can I have a copy of the vdsl controller and ethernet0.100 config please? Kind Regards, Pedro Madani
_______________________________________________ AusNOG mailing list [email protected] http://lists.ausnog.net/mailman/listinfo/ausnog
