Cameron, What devices do you have on each end?
Nathan Brookfield Chief Executive Officer Simtronic Technologies Pty Ltd http://www.simtronic.com.au > On 30 Sep 2019, at 08:31, Cameron Murray <cameron.mur...@gmail.com> wrote: > Morning, Wondered if anyone has had any experience with this type of service? We've just installed our first since it was released in May and performance is a mixed bag and Support have been little to no help as their RFC testing does not go above 1gbps. We've seen latency change from .5ms from A > B to 3.2ms and single thread TCP performance drop from 900/850 to the following testing with iPerf: [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.00 sec 159 MBytes 133 Mbits/sec 12 sender [ 4] 0.00-10.00 sec 159 MBytes 133 Mbits/sec receiver [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.00 sec 38.4 MBytes 32.2 Mbits/sec 0 sender [ 4] 0.00-10.00 sec 38.2 MBytes 32.1 Mbits/sec receiver Before we modify the service to Premium I was hoping to get a benchmark. TIA. Cameron _______________________________________________ AusNOG mailing list AusNOG@lists.ausnog.net http://lists.ausnog.net/mailman/listinfo/ausnog _______________________________________________ AusNOG mailing list AusNOG@lists.ausnog.net http://lists.ausnog.net/mailman/listinfo/ausnog
