It's a nice idea, and I'm sure more efficient in Opex and over a long
period of time with the benefits of upgrades like you say, but the Capex of
deploying all that fibre would be huge, especially as cells get more
abundant. That's why everyone really likes packets :)

Rob

On Tue, 31 Mar 2020 at 16:16, John Edwards <[email protected]> wrote:

> Dark fibre to cell sites opens up more possibilities than just bandwidth.
>
> Potentially the raw analogue waves from antennas can be re-modulated onto
> DWDM wavelengths and then digitally [de]modulated in a datacenter.
>
> This makes the whole process more efficient, reducing power and weight
> requirements of components on-site, which means that existing towers can
> carry more stuff. It also means that DSP resources that might be
> intermittently used by a stadium or university campus can be re-allocated
> somewhere else when they're not in use (there are a finite number of
> customers on the network, after all). If the system needs a hardware update
> to a new protocol, it only needs to happen at the datacentre, not by
> ripping and replacing DSP's at the top of a 30M tower.
>
> Once the industry is comfortable with that step, it can then start using
> adjacent cell sites like MIMO antennas. No more need to roam to nearby
> towers because you're already associated with them, no "hidden node"
> problem, and spatial stream capabilities that allow for massive spectrum
> re-use.
>
> For added value, they might even modulate the same 20Mhz analogue signal
> multiple times in the same wavelength. By slightly varying the phase of the
> duplicated signals into an array of antennas, it might be possible to get
> an electrical tilt effect in the antennas without any additional active
> components on-site.
>
> John
>
>
> On Tue, 31 Mar 2020 at 11:33, Dave Taht <[email protected]> wrote:
>
>> It is certainly my hope more will also deploy bufferbloat fighting
>> solutions at various points.
>> Typical cell bufferbloat is in the 1.6 second range, and would be
>> worse if various protocols didn't just time out....
>> _______________________________________________
>> AusNOG mailing list
>> [email protected]
>> http://lists.ausnog.net/mailman/listinfo/ausnog
>>
> _______________________________________________
> AusNOG mailing list
> [email protected]
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
_______________________________________________
AusNOG mailing list
[email protected]
http://lists.ausnog.net/mailman/listinfo/ausnog

Reply via email to