Hi I have used CCR1072 + CCR1036, taken 4 full feeds from upstream. No a problem.
the issue I found with the is convergence, the older models with routeros 6 from memory was single threaded bgp daemon. I believe in routeros 7 it was meant to have moved to multhreaded and faster convergence Alex On Wed, Nov 22, 2023 at 4:16 PM Mitch Kelly <[email protected]> wrote: > Hi, > > We use the Mik CCR2216 with a global table, Routing table is using about > 1GB Ram out of 16Gb, Might still be out of the price range (5k), But it > sure does beat 50k for the 8500L with only a base license. > > On Wed, Nov 22, 2023 at 8:58 AM Cameron Murray <[email protected]> > wrote: > >> Hi Nurul, >> >> What sort of throughput and port density are you looking for? >> >> Kind Regards >> >> Cameron >> >> >> On Wed, Nov 22, 2023 at 10:30 AM Nurul Islam <[email protected]> wrote: >> >>> Hi All, >>> >>> Good day. We are looking at an option to accept full Internet routing >>> table (approx 1Million Plus) from two ISP. Total route the edge router >>> probably needs to handle will be around 2 Million. >>> >>> What is the Cisco 1001-X equivalent from the current router range? Has >>> anyone used Cisco C8500L-8S4X with 16GB RAM (with performance licence) and >>> it handle this load on 2Mill internet routes? >>> >>> Regards >>> >>> >>> -N >>> _______________________________________________ >>> AusNOG mailing list >>> [email protected] >>> https://lists.ausnog.net/mailman/listinfo/ausnog >>> >> _______________________________________________ >> AusNOG mailing list >> [email protected] >> https://lists.ausnog.net/mailman/listinfo/ausnog >> > _______________________________________________ > AusNOG mailing list > [email protected] > https://lists.ausnog.net/mailman/listinfo/ausnog >
_______________________________________________ AusNOG mailing list [email protected] https://lists.ausnog.net/mailman/listinfo/ausnog
