Hi Megan,Thanks for the quick action. I reviewed the document and it looks good to me (aside from the comma issue that Falko mentioned).
Best, Johannes On 27.05.2026 18:59, Megan Ferguson wrote:
Hi Aron and *AD, [*AD - please respond regarding question #8 and review/approve the author’s suggested text to resolve question #12]. Thanks for the reply and guidance. We have updated as requested. Note that we made the further change of removing “of RFC 9980” from the Reference column of the IANA Considerations table (now list). This matches the method of referencing most commonly seen in recently published RFCs; please let us know any objections. Note that these changes are best viewed in the “alt diff” files below. Please review the files carefully as we do not make changes once the document is published as an RFC. The files have been posted here (please refresh): https://www.rfc-editor.org/authors/rfc9980.txt https://www.rfc-editor.org/authors/rfc9980.pdf https://www.rfc-editor.org/authors/rfc9980.html https://www.rfc-editor.org/authors/rfc9980.xml The diff files have been posted here (please refresh): https://www.rfc-editor.org/authors/rfc9980-diff.html (comprehensive) https://www.rfc-editor.org/authors/rfc9980-rfcdiff.html (side by side) https://www.rfc-editor.org/authors/rfc9980-auth48diff.html (Final Review changes only) https://www.rfc-editor.org/authors/rfc9980-auth48rfcdiff.html (side by side) https://www.rfc-editor.org/authors/rfc9980-alt-diff.html (to see IANA table/list changes) https://www.rfc-editor.org/authors/rfc9980-alt-rfcdiff.html (side by side) The Final Review status page for this document is viewable here: https://www.rfc-editor.org/auth48/rfc9980 Thank you. Megan Ferguson RFC Production CenterOn May 27, 2026, at 5:11 AM, Aron Wussler <[email protected]> wrote: Hi Megan, thanks for the thorough editing. We provide our answers and our suggested changes in the following. 1) We suggest the following key words: pgp, pqc, encryption, digital signature, post-quantum 2) We agreed to the following change: Section 1 OLD: Namely, these are ML-KEM [FIPS-203] as a Key Encapsulation Mechanism (KEM), a KEM being a modern building block for public key encryption, and ML-DSA [FIPS-204] as well as SLH-DSA [FIPS-205] as signature schemes. NEW: ML-KEM [FIPS-203] was selected as a Key Encapsulation Mechanism (KEM). A KEM is a modern building block for public key encryption. ML-DSA [FIPS-204] and SLH-DSA [FIPS-205] were selected as signature schemes. 3) We would like to leave these sentences in their current places. They clarify technical details of the algorithm choices, and thus do not belong into the terminology section. 4) We agreed to the following change: Section 4.3.1 OLD: Note that like in the case of the algorithms X25519 and X448 specified in [RFC9580], for the ML-KEM composite schemes, in the case of a v3 PKESK packet, the symmetric algorithm identifier is not encrypted. NEW: Note that for the ML-KEM composite schemes, in the case of a v3 PKESK packet, the symmetric algorithm identifier is not encrypted. This follows the construction of X25519 and X448 specified in [RFC9580]. 5a) We agree to the proposed change to use a definitions list. 5b) Indeed, the entries for ID 30 and ID 31 should be references to Section 5. The reference for ID 35 and 36 should be to Section 4. 6) We agree to the proposed change. 7) We agree to the proposed change. 8) We defer to the AD for this item. 9) We do not mind wrapping here. Feel free to change the tag or manually add a newline to resolve this. 10a) The abbreviation extensions seem fine to us. 10b) That is correct, you may update the document to use "Module Learning with Errors" as expansion for "MLWE". 10c) No objections. 10d) We prefer to remove "(PK)" and "(SK)" from Table 8 in Section 6.1. 11a) We prefer to use "sentence case" for the term, that is, capitalize the first word only in titles and beginning of sentences. As far as we can see, the only inconsistent spelling is in Section 2.1 in the parenthesis "(Algorithm IDs 31 and 36)". We prefer this to be adjusted to sentence case. Section 2.1 OLD: (Algorithm IDs 31 and 36) NEW: (algorithm IDs 31 and 36) 11b) The list looks fine to us. 12) We did not find any issues regarding inclusive language. The word 'traditional' is used in line with the definition of 'traditional cryptographic algorithms' in RFC 9794. For clarity, we suggest to add this term in Section 1.1.1. We propose the following change. We also believe there should be a comma before the "and", please feel free to remove it if that is wrong. Section 1.1.1 OLD: Specifically, the terms "multi-algorithm", "composite" and "non-composite" are used in correspondence with the definitions therein. NEW: Specifically, the terms "multi-algorithm", "composite", "non-composite", and "traditional" are used in correspondence with the definitions therein. Kind regards, Aron, on behalf of all authors -- Aron Wussler Sent with ProtonMail, OpenPGP key 0x7E6761563EFE3930 On Wednesday, 20 May 2026 at 15:43, Megan Ferguson <[email protected]> wrote:Hi Aron, Thanks for the heads up! We appreciate your collaboration so our mail exchange is easier to follow. We’ll look for your reply once you get things ironed out. Megan Ferguson RFC Production CenterOn May 20, 2026, at 2:20 AM, Aron Wussler <[email protected]> wrote: Hi Megan, We're already drafting internally an answer which we all agree to - sorry if this is taking longer than expected. Cheers, Aron -- Aron Wussler Sent with ProtonMail, OpenPGP key 0x7E6761563EFE3930 On Tuesday, 19 May 2026 at 19:36, Megan Ferguson <[email protected]> wrote:Authors and *AD, [*AD - please see question 8 in our mail below] Just a reminder that this document awaits your attention. Please review both emails sent thus far (AUT48 instructions as well as document-specific questions) and let us know how to proceed on any issues as well as any changes you might like to request upon completion of your review of the document. Thank you. Megan Ferguson RFC Production CenterOn May 8, 2026, at 2:50 PM, [email protected] wrote: All, *AD - please review question #8 below. Please note also that we assume AD approval of the change between versions -16 and -17 as it was submitted by Paul. Authors - While reviewing this document during AUTH48, please resolve (as necessary) the following questions, which are also in the source file. 1) <!-- [rfced] Please insert any keywords (beyond those that appear in the title) for use on https://www.rfc-editor.org/search. --> 2) <!--[rfced] This sentence is difficult to parse please rephrase (and perhaps consider breaking up into multiple sentences). Original: Namely, these are ML-KEM [FIPS-203] as a Key Encapsulation Mechanism (KEM), a KEM being a modern building block for public key encryption, and ML-DSA [FIPS-204] as well as SLH-DSA [FIPS-205] as signature schemes. --> 3) <!--[rfced] Would it make sense to include the following sentences from the subsections of 5.1 and Section 6 in the Terminology section? Original: Throughout this specification EdDSA refers to the PureEdDSA variant defined in [RFC8032]. Original: Throughout this specification ML-DSA refers to the default pure and hedged version of ML-DSA defined in [FIPS-204]. Original: Throughout this specification SLH-DSA refers to the default pure and hedged version of SLH-DSA defined in [FIPS-205]. --> 4) <!--[rfced] How may we rephrase to avoid the stacked "in the case"? Perhaps breaking this sentence up would be helpful? Original: Note that like in the case of the algorithms X25519 and X448 specified in [RFC9580], for the ML-KEM composite schemes, in the case of a v3 PKESK packet, the symmetric algorithm identifier is not encrypted. --> 5) <!--[rfced] We had the following questions related to the table in the IANA Considerations section: a) The table of IANA values is very difficult to read and, now that some edits have been made to the text, exceed our 72-character line length limit. We suggest updating to a definitions list for readability. This update would appear as seen here: https://www.rfc-editor.org/authors/rfc9980alt.txt b) We see links to specific tables in the various "Format" columns. Please review as ID 30 (for example) mentions Tables 6 and 7 (which are in Sections 5.1.1 and 5.1.2, respectively), while the Reference column is pointing to Section 5.2. If this is not as expected, please review each entry and let us know if/how to update. c) Please note that we will communicate any updates we've made to the text in the IANA table to IANA for corresponding updates at https://www.iana.org/assignments/openpgp/openpgp.xhtml#openpgp-public-key-algorithms once AUTH48 completes (and the text is stable). --> 6) <!-- [rfced] [NIST-PQC] Please review. The date provided for this reference does not match any of the dates provided at this reference's URL. At the bottom of the page the dates listed are "Created January 03, 2017, Updated December 11, 2025". Also, the authors used in this reference entry are not listed on this page (with the exception of Dustin Moody who is listed in the "Contacts" section). Is there another page this reference was meant to point to? If this is the correct URL we recommend the following update: Current: [NIST-PQC] Chen, L., Moody, D., and Y. Liu, "Post-Quantum Cryptography Standardization", December 2016, <https://csrc.nist.gov/projects/post-quantum-cryptography/post-quantum-cryptography-standardization>. Perhaps: [NIST-PQC] NIST, "Post-Quantum Cryptography Standardization", December 2025, <https://csrc.nist.gov/projects/post-quantum-cryptography/post-quantum-cryptography-standardization>. --> 7) <!-- [rfced] [NISTIR-8413] FYI: We've updated the date for this reference from September 2022 to July 2022. Note that the version from September was withdrawn and replaced by an updated version in July 2022: https://nvlpubs.nist.gov/nistpubs/ir/2022/NIST.IR.8413.pdf. We also updated the series number from "NIST IR 8413" to "NIST IR 8413-upd1". --> 8) <!--[rfced] [AD] The authors submitted a query about possible downrefs suggested by IDNITs (see list below). This is not generally something the RPC advises on. Upon conference between AD and authors, please let us know if any updates/changes are necessary. Checking references for intended status: Proposed Standard (See RFCs 3967 and 4897 for information about using normative references to lower-maturity documents in RFCs) - Possible downref: Non-RFC (?) normative reference: ref. 'FIPS-203' - Possible downref: Non-RFC (?) normative reference: ref. 'FIPS-204' - Possible downref: Non-RFC (?) normative reference: ref. 'FIPS-205' - Possible downref: Non-RFC (?) normative reference: ref. 'IANA-OPENPGP' ** Downref: Normative reference to an Informational RFC: RFC 3394 ** Downref: Normative reference to an Informational RFC: RFC 7748 ** Downref: Normative reference to an Informational RFC: RFC 8032From the authors: "We listed those references as normative as theycontain the algorithmic specifications needed. We would appreciate guidance from the RFC Editor Team if this should be handled differently." --> 9) <!--[rfced] Please have a look at the line wrap issue in Appendix A.4.3. Now that the text is in <tt> to format it as fixed width, it seems not to be able to wrap to fit within the 72-character limit.--> 10) <!--[rfced] We had the following questions/comments related to abbreviation use throughout the document: a) We have expanded abbreviations on first use. Please review these expansions for accuracy. b) The document expands MLWE as "Learning with Errors problem in module lattices (MLWE)". We believe the abbreviation stands for "Module Learning with Errors". Please let us know if/how to update. c) We have updated the expansion of SEIPD to match RFC 9580. Please let us know any objections. Original: Symmetrically Encrypted and Integrity Protected Data Current: Symmetrically Encrypted Integrity Protected Data d) We see PK and SK are introduced in Section 6.1, but are not used elsewhere in the text. Would you like to introduce them sooner and use them throughout? Or perhaps remove them from Section 6.1? --> 11) <!--[rfced] We had the following questions/comments about terminology use throughout the document: a) We see both algorithm ID and Algorithm ID. Please let us know if/how these should be made uniform. b) Please review the list of terms that appear in <tt> (for special marking) for consistency and let us know if any updates are necessary. You can find the list at: https://www.rfc-editor.org/authors/draft-ietf-openpgp-pqc-17ttsorted.txt --> 12) <!-- [rfced] Please review the "Inclusive Language" portion of the online Style Guide <https://www.rfc-editor.org/styleguide/part2/#inclusive_language> and let us know if any changes are needed. Updates of this nature typically result in more precise language, which is helpful for readers. Note that our script did not flag any words in particular, but this should still be reviewed as a best practice. In addition, please consider whether "traditional" should be updated for clarity. While the NIST website <https://web.archive.org/web/20250214092458/https://www.nist.gov/nist-research-library/nist-technical-series-publications-author-instructions#table1> indicates that this term is potentially biased, it is also ambiguous. "Tradition" is a subjective term, as it is not the same for everyone. --> Thank you. Megan Ferguson RFC Production Center *****IMPORTANT***** Updated 2026/05/08 RFC Author(s): -------------- Instructions for Completing AUTH48 Your document has now entered AUTH48. Once it has been reviewed and approved by you and all coauthors, it will be published as an RFC. If an author is no longer available, there are several remedies available as listed in the FAQ (https://www.rfc-editor.org/faq/). You and you coauthors are responsible for engaging other parties (e.g., Contributors or Working Group) as necessary before providing your approval. Planning your review --------------------- Please review the following aspects of your document: * RFC Editor questions Please review and resolve any questions raised by the RFC Editor that have been included in the XML file as comments marked as follows: <!-- [rfced] ... --> These questions will also be sent in a subsequent email. * Changes submitted by coauthors Please ensure that you review any changes submitted by your coauthors. We assume that if you do not speak up that you agree to changes submitted by your coauthors. * Content Please review the full content of the document, as this cannot change once the RFC is published. Please pay particular attention to: - IANA considerations updates (if applicable) - contact information - references * Copyright notices and legends Please review the copyright notice and legends as defined in RFC 5378 and the Trust Legal Provisions (TLP – https://trustee.ietf.org/license-info). * Semantic markup Please review the markup in the XML file to ensure that elements of content are correctly tagged. For example, ensure that <sourcecode> and <artwork> are set correctly. See details at <https://authors.ietf.org/rfcxml-vocabulary>. * Formatted output Please review the PDF, HTML, and TXT files to ensure that the formatted output, as generated from the markup in the XML file, is reasonable. Please note that the TXT will have formatting limitations compared to the PDF and HTML. Submitting changes ------------------ To submit changes, please reply to this email using ‘REPLY ALL’ as all the parties CCed on this message need to see your changes. The parties include: * your coauthors * [email protected] (the RPC team) * other document participants, depending on the stream (e.g., IETF Stream participants are your working group chairs, the responsible ADs, and the document shepherd). * [email protected], which is a new archival mailing list to preserve AUTH48 conversations; it is not an active discussion list: * More info: https://mailarchive.ietf.org/arch/msg/ietf-announce/yb6lpIGh-4Q9l2USxIAe6P8O4Zc * The archive itself: https://mailarchive.ietf.org/arch/browse/auth48archive/ * Note: If only absolutely necessary, you may temporarily opt out of the archiving of messages (e.g., to discuss a sensitive matter). If needed, please add a note at the top of the message that you have dropped the address. When the discussion is concluded, [email protected] will be re-added to the CC list and its addition will be noted at the top of the message. You may submit your changes in one of two ways: An update to the provided XML file — OR — An explicit list of changes in this format Section # (or indicate Global) OLD: old text NEW: new text You do not need to reply with both an updated XML file and an explicit list of changes, as either form is sufficient. We will ask a stream manager to review and approve any changes that seem beyond editorial in nature, e.g., addition of new text, deletion of text, and technical changes. Information about stream managers can be found in the FAQ. Editorial changes do not require approval from a stream manager. Approving for publication -------------------------- To approve your RFC for publication, please reply to this email stating that you approve this RFC for publication. Please use ‘REPLY ALL’, as all the parties CCed on this message need to see your approval. Files ----- The files are available here: https://www.rfc-editor.org/authors/rfc9980.xml https://www.rfc-editor.org/authors/rfc9980.html https://www.rfc-editor.org/authors/rfc9980.pdf https://www.rfc-editor.org/authors/rfc9980.txt Diff file of the text: https://www.rfc-editor.org/authors/rfc9980-diff.html https://www.rfc-editor.org/authors/rfc9980-rfcdiff.html (side by side) Diff of the XML: https://www.rfc-editor.org/authors/rfc9980-xmldiff1.html Tracking progress ----------------- The details of the AUTH48 status of your document are here: https://www.rfc-editor.org/auth48/rfc9980 Please let us know if you have any questions. Thank you for your cooperation, RFC Editor -------------------------------------- RFC9980 (draft-ietf-openpgp-pqc-17) Title : Post-Quantum Cryptography in OpenPGP Author(s) : S. Kousidis, J. Roth, F. Strenzke, A. Wussler WG Chair(s) : Stephen Farrell, Daniel Kahn Gillmor Area Director(s) : Deb Cooley, Christopher Inacio
smime.p7s
Description: S/MIME Cryptographic Signature
-- auth48archive mailing list -- [email protected] To unsubscribe send an email to [email protected]
