--------------------------------------------------------------------------------
Please retain this line in all replies: <ID:NAD01092644047-268553760>
--------------------------------------------------------------------------------
RedHat 7.0 is not supported on this server because it hasn't been tested. For
questions regarding kernel configuration please contact RedHat.
Thank you
Compaq eServices..
Hi!
I am installed RedHat 7.0 on Compaq Proliant 5500 and using RAID.
System is properly running.
Then, i edit two file (values: SHMMAX, SHMMIN, ....)
/usr/src/linux/include/asm/shmparam.h
/usr/src/linux/include/linux/sem.h
then, recompile kernel
cd /usr/src/linux
make distclean
make mrproper
startx
make xconfig
then, save config
make dep
make clean
make bzImage
cp /usr/src/linux/arch/i386/boot/bzImage /boot/vmlinuz-2.2.16-22-1
then, edit /etc/lilo.conf and add block for new kernel
But, then reboot system occur error:
Linux version 2.2.16-22 ( [EMAIL PROTECTED]) (gcc version
egcs-2.91.66
19990314/Linux (egcs-1.1.2 release)) #1 Tue Aug 22 16:49:06 EDT
2000
Detected 499839 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 996.15 BogoMIPS
Memory: 257136k/262144k available (1048k kernel code, 412k
reserved, 3024k data,
64k init, 0k bigmem)
Dentry hash table entries: 262144 (order 9, 2048k)
Buffer cache hash table entries: 262144 (order 8, 1024k)
Page cache hash table entries: 65536 (order 6, 256k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Pentium III (Katmai) stepping 02
Checking 386/387 coupling... OK, FPU using exception 16 error
reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch ( [EMAIL PROTECTED])
PCI: PCI BIOS revision 2.10 entry at 0xf0080
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: 00:80 [8086/84ca]: Scanning peer host bridges
PCI: Device 00:78 not found by BIOS
PCI: Device 00:80 not found by BIOS
PCI: Device 00:78 not found by BIOS
PCI: Device 00:80 not found by BIOS
PCI: Device 00:90 not found by BIOS
PCI: Device 00:98 not found by BIOS
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x3000-0x3007, BIOS settings: hda:pio, hdb:pio
hda: CD-ROM CDU701-Q, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
pII_mmx : 1112.520 MB/sec
p5_mmx : 1168.527 MB/sec
8regs : 858.012 MB/sec
32regs : 481.203 MB/sec
using fastest function: p5_mmx (1168.527 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
RAMDISK: Compressed image found at block 0
autodetecting RAID arrays
autorun ...
... autorun DONE.
request_module[block-major-72]: Root fs not mounted
VFS: cannot open root device 48:01
Kernel panic: VFS: unable to mount root ffs on 48:01
You can help me config this kernel
THANK YOU!
