Hi Chris~
There may be a little problem in virsh_migrate.py test.
I did the test with the following environment:
source host: 192.168.1.40
destination host: 192.168.1.30
I cancelled the test when "there" had finished, but "back" didn't start.
The second time I run the test, I got this error:
ERROR| Start VM vm1 failed:
Command </usr/bin/virsh -c qemu+ssh://192.168.1.30/system start vm1> failed,
rc=1, Command returned non-zero exit status
* Command:
/usr/bin/virsh -c qemu+ssh://192.168.1.30/system start vm1
Exit status: 1
I found that when "there" was finished, vm.connect_uri was set to 192.168.1.30,
and it remained.
So "there" and "back" must be run in pairs.
I am wondering if this is a good idea. If there is something wrong within
"there", the environment will be changed.
And the other tests may be influenced.
--
Best Regards,
Tang chen
--------------------------------------------------
Tang Chen
Development Dept.I
Nanjing Fujitsu Nanda Software Tech. Co., Ltd.(FNST)
No.6 Wenzhu Road, Nanjing, 210012, China
TEL: +86+25-86630566-8527
FUJITSU INTERNAL: 7998-8527
FAX: +86+25-83317685
EMail: [email protected]
--------------------------------------------------
This communication is for use by the intended recipient(s) only and may contain
information that is privileged, confidential and exempt from disclosure under
applicable law. If you are not an intended recipient of this communication, you
are hereby notified that any dissemination, distribution or copying hereof is
strictly prohibited. If you have received this communication in error, please
notify me by reply e-mail, permanently delete this communication from your
system, and destroy any hard copies you may have printed
_______________________________________________
Autotest mailing list
[email protected]
http://test.kernel.org/cgi-bin/mailman/listinfo/autotest
