Here is the output from avarice 2.9.
Apparently, I'm also having trouble running avarice 2.12/2.13 from my
cygwin. It just does not run it... When I try to build avarice, it does
not include libusb although I installed libusb 1.0 and libusb 1.0 dev in
my cygwin. Can you give me a hint, what cygwin packages I need?
Am 16.03.2014 13:08, schrieb Joerg Wunsch:
As Matthias Steinkamp wrote:
Sample Output:
/C:\Tools\AVR\AVR Toolchain\bin>avarice -2 --jtag usb :4242//
Try using the -d option, and see whether it tells you something.
AVaRICE version 2.9, Jan 7 2010 22:42:57
Defaulting JTAG bitrate to 250 kHz.
Found JTAG ICE, serno: A000000D3F
Attempting synchronisation at bitrate 19200
command[0x01, 1]: 01
recv: 0x1b
recv: 0x00
recv: 0x00
recv: 0x1c
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 28 bytes
read: 86 01 ff 25 05 00 ff 25 05 01 00 a0 00 00 0d 3f 4a 54 41 47 49 43 45 6d
6b 49 49 00
recv: 0x23
recv: 0xe4
CRC OK
Got message seqno 0 (command_sequence == 0)
response: 86 01 FF 25 05 00 FF 25 05 01 00 A0 00 00 0D 3F 4A 54 41 47 49 43 45
6D 6B 49 49 00
JTAG ICE mkII sign-on message:
Communications protocol version: 1
M_MCU:
boot-loader FW version: 255
firmware version: 5.37
hardware version: 0
S_MCU:
boot-loader FW version: 255
firmware version: 5.37
hardware version: 1
command[0x02, 1]: 02 03 01
recv: 0x1b
recv: 0x01
recv: 0x00
recv: 0x01
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 1 bytes
read: 80
recv: 0xcd
recv: 0x83
CRC OK
Got message seqno 1 (command_sequence == 1)
response: 80
command[0x0a, 1]: 0A 01
recv: 0x1b
recv: 0x02
recv: 0x00
recv: 0x01
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 1 bytes
read: 80
recv: 0x1d
recv: 0x09
CRC OK
Got message seqno 2 (command_sequence == 2)
response: 80
Automatic device detection:
command[0x03, 1]: 03 0E
recv: 0x1b
recv: 0x03
recv: 0x00
recv: 0x05
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 5 bytes
read: 81 3f 20 70 c9
recv: 0x84
recv: 0xbc
CRC OK
Got message seqno 3 (command_sequence == 3)
response: 81 3F 20 70 C9
JTAG id = 0xC970203F : Ver = 0xc : Device = 0x9702 : Manuf = 0x1f
command[0x0c, 1]: 0C FF 6F FF FF FB FF FF FF 00 00 00 00 00 00 00 00 8C 26 B6
FD FB FF BF FE 00 00 00 00 00 00 00 00 3E B5 1F 37 FF 1F 21 2F 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 36 B5 0F 27 FF 1F 21 27 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 22 68 3B 00 01 08 00 FE 00 00 9D 00 00
00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3E 3D 00 02 00 00 01 00 00 01 00 00 01 00 00 00 00 1C 00
recv: 0x1b
recv: 0x04
recv: 0x00
recv: 0x01
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 1 bytes
read: 80
recv: 0xac
recv: 0x14
CRC OK
Got message seqno 4 (command_sequence == 4)
response: 80
command[0x02, 1]: 02 07 15
recv: 0x1b
recv: 0x05
recv: 0x00
recv: 0x01
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 1 bytes
read: 80
recv: 0x13
recv: 0x95
CRC OK
Got message seqno 5 (command_sequence == 5)
response: 80
command[0x14, 1]: 14
recv: 0x1b
recv: 0x06
recv: 0x00
recv: 0x01
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 1 bytes
read: 80
recv: 0xc3
recv: 0x1f
CRC OK
Got message seqno 6 (command_sequence == 6)
response: 80
jtagRead
command[0x05, 1]: 05 B3 01 00 00 00 00 00 00 00
recv: 0x1b
recv: 0x07
recv: 0x00
recv: 0x02
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 2 bytes
read: 82 ff
recv: 0xd3
recv: 0x2d
CRC OK
Got message seqno 7 (command_sequence == 7)
response: 82 FF
jtagRead
command[0x05, 1]: 05 B2 03 00 00 00 00 00 00 00
recv: 0x1b
recv: 0x08
recv: 0x00
recv: 0x04
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 4 bytes
read: 82 cf 09 ff
recv: 0x29
recv: 0x69
CRC OK
Got message seqno 8 (command_sequence == 8)
response: 82 CF 09 FF
command[0x15, 1]: 15
recv: 0x1b
recv: 0x09
recv: 0x00
recv: 0x01
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 1 bytes
read: 80
recv: 0x71
recv: 0xae
CRC OK
Got message seqno 9 (command_sequence == 9)
response: 80
command[0x0b, 1]: 0B 01
recv: 0x1b
recv: 0x0a
recv: 0x00
recv: 0x01
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 1 bytes
read: 80
recv: 0xa1
recv: 0x24
CRC OK
Got message seqno 10 (command_sequence == 10)
response: 80
Waiting for input.
USB daemon died
------------------------------------------------------------------------------
Learn Graph Databases - Download FREE O'Reilly Book
"Graph Databases" is the definitive new guide to graph databases and their
applications. Written by three acclaimed leaders in the field,
this first edition is now available. Download your free book today!
http://p.sf.net/sfu/13534_NeoTech
_______________________________________________
avarice-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/avarice-user
