Read the config.log
----- Original Message ----- From: "Justin Piszcz" <[EMAIL PROTECTED]> To: "Jonathan Jefferies" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Wednesday, November 26, 2003 00:36 Subject: Re: [Avifile]Error in compiling Avifiles > Try the CVS. > > > On Thu, 6 Nov 2003, Jonathan Jefferies wrote: > > > > > Building > > avifile-0.7-0.7.38.tar.gz 2888580 14611 Platform-IndependentSource .gz > > on RedHat 9.0 for use with drip-0.8.3.2 > > > > During ./configure get the following error message: > > > > checking for Qt library (version >= 200)... no > > configure: warning: > > *** Could not run Qt test program, checking why... > > *** Configure discovered/uses these settings: > > *** Qt libraries: /usr/lib/qt-3.1/lib > > *** Qt headers: /usr/lib/qt-3.1/include > > *** Note: > > *** Compilation of Qt utilities also might be turned off (if not wanted). > > *** If you are experiencing problems which will not be described > > *** bellow please report then on '[EMAIL PROTECTED]' mailing list > > *** (i.e. some misdetection or omitted path) > > > > configure: error: > > *** Qt test program compiled, but did not run. This usually means > > *** that the run-time linker is not finding Qt library or finding the wrong > > *** version of Qt. If it is not finding Qt, you will need to set your > > *** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point > > *** to the installed location Also, make sure you have run ldconfig if that > > *** is required on your system. > > *** > > *** If you have an old version installed, it is best to remove it, although > > *** you may also be able to get things to work by modifying LD_LIBRARY_PATH > > *** > > *** i.e. bash> export LD_LIBRARY_PATH=/usr/lib/qt-3.1/lib:$LD_LIBRARY_PATH > > > > RESPONSE:: > > > > cat /etc/ld.so.conf > > /usr/kerberos/lib > > /usr/X11R6/lib > > /usr/lib/qt-3.1/lib > > /usr/lib/wine > > /usr/lib/mysql > > /usr/lib/sane > > > > ls /usr/lib/qt-3.1/lib > > libdesigner.so libqassistantclient.so.1 libqt.so.3 > > libdesigner.so.1 libqassistantclient.so.1.0 libqt.so.3.1 > > libdesigner.so.1.0 libqassistantclient.so.1.0.0 libqt.so.3.1.1 > > libdesigner.so.1.0.0 libqt-mt.so libqui.so > > libeditor.so.1 libqt-mt.so.3 libqui.so.1 > > libeditor.so.1.0 libqt-mt.so.3.1 libqui.so.1.0 > > libeditor.so.1.0.0 libqt-mt.so.3.1.1 libqui.so.1.0.0 > > libqassistantclient.so libqt.so > > > > also set export LD_LIBRARY_PATH=/usr/lib/qt-3.1/lib:$LD_LIBRARY_PATH > > in ~/.bashrc and ran ldconfig as a caution. Error remains > > > > Suggestions? There are additional qt libraries possibly used by other > > applications: > > /usr/lib/qt-3.0.5/lib > > /usr/lib/qt2/lib > > > > thanks > > J. > > > > > > > > > > applications: > > > > > > > > _______________________________________________ > > Avifile mailing list > > [EMAIL PROTECTED] > > http://prak.org/mailman/listinfo/avifile > > > > _______________________________________________ > Avifile mailing list > [EMAIL PROTECTED] > http://prak.org/mailman/listinfo/avifile _______________________________________________ Avifile mailing list [EMAIL PROTECTED] http://prak.org/mailman/listinfo/avifile
