>> I am trying to program an Atmega32 on a stk500 development board by >> using avrdude. >> >>> avrdude -p atmega32 -P /dev/ttyS5 -c stk500v2 -U flash:w:MessageBoard.hex >> starts the programming proces. And usaly it programs the chip but it is >> very slow (writing 4224 bytes of flash takes about 118 seconds) and >> produces a lot of stk500_2_ReceiveMessage90; timeout messages. >> >> I asume this is not 'normal' behaviour. Does anybody have any >> suggestions to speed up the programming proces and eliminate the timeout >> messages? Is the problem with avrdude, the serial drivers or with the >> stk500? >> >> I use avrdude on Ubuntu 6.06, kernel 2.6.15-23-amd64 but have >> experienced the same problem on my labtop (ubuntu 5.10, kernel >> 2.6.12-10-386) on both avrdude 5 as 5.1 > > This is a longshot, but is there a possibility that some other program > has the serial port open? I have gotten timeouts like this when I've > had kermit running simultaneously with avrdude. > > galen
Unfortunately, the shot missed. I dubble checked and as far as I can tell no other programs have the serial port open. Thanks for the suggestion though. Onno _______________________________________________ AVR-chat mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/avr-chat
