I have desinstall Jungo USB driver and install WinAVR util/usb/bin driver Libusb
It start to work.
AVRDUDE don't support Jungo but AVR Studio support it and uses AVRDUDE.
Something is missing - need explanation!
Some I have fix my problem but remain sad about this very ugly fix.
Do you have a better solution ?
Best Pierre
----- Original Message -----
From: Pierre Ghislain
To: [email protected]
Sent: Wednesday, January 14, 2009 11:44 AM
Subject: avrispmkII and AVRDUDE with USB
I am trying to talk via avrdude to my AVRISP mkII via USB
I use the flag
-P usb:94 where 94 are the last characters of the serialnumber of my
AVRISP mkII
Also I have try to use
-b 8452 (0x2104 product Id) which is compare with IdProduct in the avrdude
source usb_lib
I always get the same error message:
avrdude -c avrispmkII -p m168 -P usb:94 -v 99 -b 8452 -e -u -U lock:w:0x3f:m -
U efuse:w:0x00:m -U hfuse:w:0x:m -U lfuse:w:0x:m
avrdude: Version 5.6cvs, compiled on Nov 10 2008 at 17:15:38
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
System wide configuration file is "C:\WinAVR-20081205\bin\avrdude.conf"
Using Port : usb:94
Using Programmer : avrispmkII
Overriding Baud Rate : 8452
avrdude: usbdev_open(): did not find any (matching) USB device "usb:94"
make: *** [isp] Error 1
Any Clue ?
Thanks in advance!
Pierre Ghislain_______________________________________________
AVR-chat mailing list
[email protected]
http://lists.nongnu.org/mailman/listinfo/avr-chat
