Hi,
----- Original Message -----
From: "Vincent Trouilliez" <vincent.trouill...@modulonet.fr>
So is there any DIY cables (or pre-built, but mega cheap, and
available in the Euro zone) that run on a USB port ?
Recently I constructed Tuxgraphics AvrUsb500v2 -- an open source Atmel AVR
Programmer, stk500 V2 compatible, with USB interface.
It works really very well, and it is very low cost.
All schematics, source code, hex files, PCB files are available, as also
kits from the web-shop.
I chose to build it & make the PCB myself.
Only difference is that I used a ready available USB/serial bridge that I
had, instead of the FTDI chip used in the original circuit.
Here is the link :
http://tuxgraphics.org/electronics/200705/article07052.shtml
Best regards,
--Royce Pereira.
_______________________________________________
AVR-chat mailing list
AVR-chat@nongnu.org
http://lists.nongnu.org/mailman/listinfo/avr-chat
