Hi Georg, I would recommend these things:
- Build avr-libc from the current trunk, and use "make -k". I'm currently working on a set of changes to avr-libc that should get it to build without the -k switch to make. - Please don't use gcc 4.5.1 for any real-world work. I've heard that there are bug reports against AVR GCC 4.5.x that need to get fixed. However, if you're using 4.5.1 to do some testing on the AVR port then that would be very helpful. Eric Weddington > -----Original Message----- > From: > avr-gcc-list-bounces+eric.weddington=atmel....@nongnu.org > [mailto:avr-gcc-list-bounces+eric.weddington=atmel....@nongnu. org] On Behalf Of Georg Lay > Sent: Tuesday, November 02, 2010 12:02 PM > To: avr-gcc-list@nongnu.org > Subject: [avr-gcc-list] avr-libc-1.7.0 fails to compile > > Building avr-libc-1.7.0 I am running into the error indicated in the > attachment. Any ideads? > > Build with binutils-2.20 + gcc-4.5.1 confuigured > > ../../source/avr-libc-1.7.0/configure > --prefix=/home/georg/gcc/install/gcc-4.5.1 --build=i686-linux-gnu > --host=avr > > Cheers, Georg > _______________________________________________ AVR-GCC-list mailing list AVR-GCC-list@nongnu.org http://lists.nongnu.org/mailman/listinfo/avr-gcc-list
