hello all, we have developed a new new programming tutorial that should help you get going on AVR platforms using a simple yet powerful operating system.
BTnode Programming - An Introduction to BTnut Applications http://www.btnode.ethz.ch/support/btnodetutorial/index.html This tutorial originated in the Embedded Systems lecture, a graduate course taught at the Department of Information Technology and Electrical Engineering, ETH Zurich. It requires basic knowledge of C-programming and embedded systems and should give an overview of the capabilities of networked embedded systems and their key properties. Apart from usage in the lecture it is a basic introduction to programming on the BTnode platform. Contents The tutorial is set up in 5 sessions requiring about 2 hours each: * First Steps in BTnode Programming - Development Tools and BTnode Architecture * Device-Level Programming * Programming with Threads * Embedded Debugging * Communication using Bluetooth Hard- and Software Requirements To be able to do the practical exercises in this tutorial you will need a BTnode developer kitconsisting of a BTnode~rev3, a usbprog USB programming adapter, an Atmel ATAVRISP programmer, a serial and a USB cable, a 15-Pin Molex breakout cable and the software, documentation and tools contained on the BTnode CDROM. best, Jb Jan Beutel [EMAIL PROTECTED] Computer Engineering and Networks Laboratory, ETZ G75 ETH Zurich +41 1 632 70 32 Phone Gloriastrasse 35 +41 1 632 10 35 Fax CH 8092 Zurich/Switzerland http://www.tik.ee.ethz.ch/~beutel _______________________________________________ AVR-libc-dev mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/avr-libc-dev
