Love to. Unfortunately there was nothing attached.
Best regards, Stu Bell DataPlay (DPHI, Inc.) -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Weddington, Eric Sent: Wednesday, April 09, 2008 8:40 AM To: Dmitry K.; [email protected] Subject: RE: [avr-libc-dev] [bug #22878] eeprom_*_word/dword/block causehanginATmega256x > -----Original Message----- > From: > [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > org] On Behalf Of Weddington, Eric > Sent: Wednesday, April 09, 2008 8:24 AM > To: Dmitry K.; [email protected] > Subject: RE: [avr-libc-dev] [bug #22878] eeprom_*_word/dword/block > causehangin ATmega256x > > > > > -----Original Message----- > > From: > > [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] > > org] On Behalf Of Dmitry K. > > Sent: Wednesday, April 09, 2008 12:24 AM > > To: [email protected] > > Subject: Re: [avr-libc-dev] [bug #22878] eeprom_*_word/dword/block > > cause hangin ATmega256x > > > > Hm... > > > > Is avr-gcc for avr6 ready to use? > > > > I have try avr-gcc 4.4-20080404 (4.3.0 does not support avr6) with > > binutils 2.18. > > You need to try either 4.4 with Andy's combine.c patch committed (only > recently) or 4.3 with his patch. See attached. > > I will try your test case later on today with Andy's patch. See attached compiler output. So far it looks ok to me. Eric _______________________________________________ AVR-libc-dev mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/avr-libc-dev
