URL:
<http://savannah.nongnu.org/bugs/?25929>
Summary: boot.h Fuse read not compatible with Tiny48/88.
Project: AVR C Runtime Library
Submitted by: bpaddock
Submitted on: Thu 19 Mar 2009 08:45:38 AM EDT
Category: Library
Severity: 3 - Normal
Priority: 5 - Normal
Item Group: libc code
Status: None
Percent Complete: 0%
Assigned to: None
Open/Closed: Open
Discussion Lock: Any
Release: 1.6.5
Fixed Release: None
_______________________________________________________
Details:
boot_lock_fuse_bits_get() Assumes that BLBSET is defined.
In the Tinyx8 RLFB is used, not BLBSET:
SPMCSR – Store Program Memory Control and Status Register
"Bit 3 – RFLB: Read Fuse and Lock Bits An LPM instruction within
three cycles after RFLB and SELFPRGEN are set in the SPMCSR
Register, will read either the Lock bits or the Fuse
bits (depending on Z0 in the Z-pointer) into the destination
register. See 'Reading the Fuse and Lock Bits from Software' on
page 176 for details."
_______________________________________________________
Reply to this item at:
<http://savannah.nongnu.org/bugs/?25929>
_______________________________________________
Message sent via/by Savannah
http://savannah.nongnu.org/
_______________________________________________
AVR-libc-dev mailing list
AVR-libc-dev@nongnu.org
http://lists.nongnu.org/mailman/listinfo/avr-libc-dev
