[avr-libc-dev] [bug #30604] Error in iox192d3.h

[Mike]

URL:
  <http://savannah.nongnu.org/bugs/?30604>

                 Summary: Error in iox192d3.h
                 Project: AVR C Runtime Library
            Submitted by: mvidales
            Submitted on: Fri 30 Jul 2010 05:35:43 PM GMT
                Category: Header
                Severity: 3 - Normal
                Priority: 5 - Normal
              Item Group: Header files
                  Status: None
        Percent Complete: 0%
             Assigned to: None
             Open/Closed: Open
         Discussion Lock: Any
                 Release: 1.6.6
           Fixed Release: None

    _______________________________________________________

Details:

While using the ADC CH0 structure, I noticed an offset error in the ADC_t
structure that defines where CH0 is positioned.
The following is the example of what I see:/* Analog-to-Digital Converter */
typedef struct ADC_struct
{
    register8_t CTRLA;  /* Control Register A */
    register8_t CTRLB;  /* Control Register B */
    register8_t REFCTRL;  /* Reference Control */
    register8_t EVCTRL;  /* Event Control */
    register8_t PRESCALER;  /* Clock Prescaler */
    register8_t CALCTRL;  /* Calibration Control Register */
    register8_t INTFLAGS;  /* Interrupt Flags */
    register8_t reserved_0x07;
    register8_t reserved_0x08;
    register8_t reserved_0x09;
    register8_t reserved_0x0A;
    register8_t reserved_0x0B;
    _WORDREGISTER(CAL);  /* Calibration Value */
    register8_t reserved_0x0E;
    register8_t reserved_0x0F;
    _WORDREGISTER(CH0RES);  /* Channel 0 Result */
    _WORDREGISTER(CMP);  /* Compare Value */
    register8_t reserved_0x1A;
    register8_t reserved_0x1B;
    register8_t reserved_0x1C;
    register8_t reserved_0x1D;
    register8_t reserved_0x1E;
    register8_t reserved_0x1F;
    ADC_CH_t CH0;  /* ADC Channel 0 */
} ADC_t;

and this is the temporary fix I tried:

/* Analog-to-Digital Converter */
typedef struct ADC_struct
{
    register8_t CTRLA;  /* Control Register A */
    register8_t CTRLB;  /* Control Register B */
    register8_t REFCTRL;  /* Reference Control */
    register8_t EVCTRL;  /* Event Control */
    register8_t PRESCALER;  /* Clock Prescaler */
    register8_t CALCTRL;  /* Calibration Control Register */
    register8_t INTFLAGS;  /* Interrupt Flags */
    register8_t reserved_0x07;
    register8_t reserved_0x08;
    register8_t reserved_0x09;
    register8_t reserved_0x0A;
    register8_t reserved_0x0B;
    _WORDREGISTER(CAL);  /* Calibration Value */
    register8_t reserved_0x0E;
    register8_t reserved_0x0F;
    _WORDREGISTER(CH0RES);  /* Channel 0 Result */
    register8_t reserved_0x01;
    register8_t reserved_0x02;
    register8_t reserved_0x03;
    register8_t reserved_0x04;
    register8_t reserved_0x05;
    register8_t reserved_0x06;
    _WORDREGISTER(CMP);  /* Compare Value */
    register8_t reserved_0x1A;
    register8_t reserved_0x1B;
    register8_t reserved_0x1C;
    register8_t reserved_0x1D;
    register8_t reserved_0x1E;
    register8_t reserved_0x1F;
    ADC_CH_t CH0;  /* ADC Channel 0 */
} ADC_t;

It looks like this is due to the removal of other channels in other Xmega
devices (CH1, CH2, CH3).

This could apply to other D3 device files.

Thanks
Mike




    _______________________________________________________

Reply to this item at:

  <http://savannah.nongnu.org/bugs/?30604>

_______________________________________________
  Message sent via/by Savannah
  http://savannah.nongnu.org/


_______________________________________________
AVR-libc-dev mailing list
AVR-libc-dev@nongnu.org
http://lists.nongnu.org/mailman/listinfo/avr-libc-dev