Hi Barry,
I posted the same problem last week using the stk500v2 and a tiny13,
flash would write ok, but could not write eeprom.
I wanted to use avrdude over avr studio, and since I was using the
stk500 board as just a basic programmer, I ended up building a bsd style
par port programmer.
This allowed me to write flash and eeprom no problems... so from that
I'd say that the problem is stk500v2 specific, possible missing
information...
I havn't poked to deeply to find out what the problem is stk500 because
I can work around it... might take a closer look when I get a chance..
Regards
Neil Davey
[EMAIL PROTECTED] wrote:
Hi there
I've just started using avrdude, so I hope this is not a newb issue. I
can't seem to write to the EEPROM and I've tried using different file
formats, but it keeps coming back to the same thing, the error message
below.
stk500v2_paged_write: loadpage instruction not defined for part "ATMEGA88"
Either a file format that works or a fix for the avrdude.conf file
would be appreciated.
Regards
Barry de Bruyn
_______________________________________________
avrdude-dev mailing list
[email protected]
http://lists.nongnu.org/mailman/listinfo/avrdude-dev
--
--------------------------------------
Neil Davey
Griffith University
School of Microelectronic Engineering
Nathan Campus
Phone: 07-3735-7008
Fax: 07-3735-5112
School of Psychology - ACNRC
Mt Gravatt Campus
Phone: 07-3735-3395
--------------------------------------
_______________________________________________
avrdude-dev mailing list
[email protected]
http://lists.nongnu.org/mailman/listinfo/avrdude-dev
