When i use the attached avrdude.conf.in file, i get error given below in this
post. Something with a 'j' (?). This also happens if i reinstall avrdude with
the new file.
However, if i cut'n paste the ATmega162 part from the posted file to my
existing avrdude.conf, it works!
Thanks!
Esben
The following is the error i get when using the attached avrdude.conf with
avrdude 5.0.
- avrdude -p m162 -P /dev/ttyS0 -c stk500v2 -v -U flash:w:rom.hex
avrdude: Version 5.0
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
System wide configuration file is "/usr/local/etc/avrdude.conf"
error at /usr/local/etc/avrdude.conf:276 unrecognized character: "j"
_______________________________________________
avrdude-dev mailing list
[email protected]
http://lists.nongnu.org/mailman/listinfo/avrdude-dev
