URL:
<http://savannah.nongnu.org/bugs/?func=detailitem&item_id=15840>
Summary: pgm_led OFF during initialize
Project: AVR Downloader/UploaDEr
Submitted by: None
Submitted on: Tue 02/21/06 at 16:29
Category: None
Severity: 3 - Normal
Priority: 5 - Normal
Item Group: None
Status: None
Privacy: Public
Assigned to: None
Originator Name: Hans Forssell
Originator Email: [EMAIL PROTECTED]
Open/Closed: Open
_______________________________________________________
Details:
We have a mux controlled by the pgm_led signal that disconnects the ISP port
when not used (pgm_led high). For programming we are using the PONY-STK200
programmer connected to an ATmega128.
avrdude 5.1 does not set the pgm_led to ON during initialize
(bitbang_initialize), resulting in that the AVR is not detected.
The current solution is to change the avrdude.conf file to control the
pgm_led as if it were the buff signal. A better solution would be to always
set the pgm_led ON when accessing the AVR (as PonyProg does?).
Regards
Hans Forssell
_______________________________________________________
Carbon-Copy List:
CC Address | Comment
------------------------------------+-----------------------------
kopiad --AT-- hotmail --DOT-- com | Originator Email
_______________________________________________________
Reply to this item at:
<http://savannah.nongnu.org/bugs/?func=detailitem&item_id=15840>
_______________________________________________
Message sent via/by Savannah
http://savannah.nongnu.org/
_______________________________________________
avrdude-dev mailing list
[email protected]
http://lists.nongnu.org/mailman/listinfo/avrdude-dev
